Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: CMF050H523N3ENEZZZ Series: ELITE Series Coriolis Flow Meter (Premium performance) Sensor Size: CMF050 (Approximately 1/2 inch / DN15 line size) Flow Tube Material: H likely indicates High-temperature construction or a specific material variant (possibly C-22 alloy for high-temp service, or Hastelloy) Enclosure Material: 523 typically indicates a specific rugged enclosure configuration Process Connections: N3E typically represents a specific flange type and size (e.g., 1/2 inch Class 300 or 600 flanges) Core Processor/Electronics: NEZZZ indicates this is a sensor-only unit with standard electronics compatibility and specific approvals Hazardous Area Approvals: Designed for Zone 1/Division 1 hazardous locations (standard for ELITE series) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., concentration) Flow Tube Configuration: Single continuous tube design for drainability and cleanliness Accuracy (Mass Flow): Up to ±0.05% of rate (ELITE performance) Accuracy (Density): Up to ±0.0005 g/cm³ (ELITE performance) Repeatability (Mass Flow): Up to ±0.025% of rate Nominal Flow Rate (Water): Typically up to 2,800 kg/h (6,200 lb/h) for CMF050, depending on fluid properties Turndown: Exceptionally high (up to 1000:1) Fluid Temperature Range: If "H" indicates high-temperature version: up to 350°C (662°F) or higher; standard range typically -240°C to 204°C (-400°F to 400°F) Pressure Rating: Up to 6,000 psi (414 bar) depending on process connection Flow Tube Material: Likely C-22 alloy or high-temperature variant of 316L stainless steel Case Material: Low-copper aluminum with polyester paint