Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: CMF200M419NRA8MZZZ Series: ELITE Series Coriolis Flow Meter (Premium performance) Sensor Size: CMF200 (Typically 1-1/2 inch / DN40 line size) Flow Tube Material: M indicates C-22 Alloy (Hastelloy C-22 equivalent) - Superior corrosion resistance Enclosure Material: 419 typically indicates a specific rugged enclosure configuration with enhanced features Process Connections: NRA typically represents 1-1/2 inch Class 300 or 600 Raised Face flanges (C-22 Alloy material consistent with wetted parts) Core Processor/Electronics: 8MZZZ indicates this is a sensor-only unit with specific electronics compatibility and approvals (likely includes advanced diagnostic capabilities) Hazardous Area Approvals: Designed for Zone 1/Division 1 hazardous locations (standard for ELITE series) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., concentration, viscosity) Flow Tube Configuration: Dual-tube design for superior balance and accuracy Accuracy (Mass Flow): Up to ±0.05% of rate (ELITE performance) Accuracy (Density): Up to ±0.0005 g/cm³ (ELITE performance) Repeatability (Mass Flow): Up to ±0.025% of rate Nominal Flow Rate (Water): Typically up to 65,000 kg/h (143,000 lb/h) for CMF200, depending on fluid properties and pressure rating Turndown: Exceptionally high (up to 1000:1) Fluid Temperature Range: -240°C to 204°C (-400°F to 400°F), depending on installation and electronics Pressure Rating: Up to 6,000 psi (414 bar) depending on process connection Flow Tube Material: C-22 Alloy (Hastelloy C-22) Case Material: Low-copper aluminum with polyester paint