Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: CDM100P329MCBZ00MAZZL Series: CDM (Coriolis Density Meter) Sensor Size: CDM100 (Typically 1 inch or DN25 line size) Flow Tube Material: P likely indicates C-22 Alloy or specialized material for corrosion resistance Enclosure Material: 329 typically indicates a specific rugged enclosure configuration Process Connections: MCB likely represents a specific flange or sanitary connection type (e.g., sanitary clamp or flanged) Connection Size: Z00 indicates a specific size (e.g., 1 inch or 1.5 inch connection) Electronics/Output: MAZZL indicates specific electronics configuration and approvals Measured Variables: Primary: Density Secondary: Temperature Optional: Mass Flow, Volume Flow (depending on electronics configuration) Density Accuracy: Up to ±0.0002 g/cm³ (0.2 kg/m³) - Premium density performance Density Repeatability: Up to ±0.0001 g/cm³ (0.1 kg/m³) Temperature Accuracy: ±0.5°C (±0.9°F) typical Flow Tube Material: C-22 Alloy (Hastelloy C-22 equivalent) or specialized alloy Enclosure Rating: NEMA 4X (IP66/67) - Suitable for outdoor and harsh environments Fluid Temperature Range: -40°C to 150°C (-40°F to 302°F) standard; extended ranges available Pressure Rating: Depends on connection type, typically up to 1,450 psi (100 bar) Nominal Flow Rate (if flow option enabled): Up to 3,600 kg/h (7,900 lb/h) for CDM100 Turndown: High turndown for flow measurement (if enabled) Hazardous Area Approvals: Designed for Zone 1/Division 1 or Zone 2/Division 2 depending on configuration