Key Technical Parameters Summary
Input Signal: 0 to 5V DC (Other voltage or resistance ranges are possible via configuration)

Output: 4-20 mA DC, 2-wire system, with HART® 7 protocol

Scaled Range (EU): 0 to 50 °C (The output is linear with this engineering value)

Power Supply: 12 to 42 V DC (standard loop power for 2-wire instruments)

Ambient Temperature: -50 to 85 °C (-58 to 185 °F)

Housing: Plastic (ABS)

Electrical Entry: Two M20 x 1.5 (Metric conduit connection)

Display: None

Safety Approvals (Primary):

ATEX/IECEx/UKCA: Ex ia IIC T6 Ga (Intrinsic Safety) / Ex nA IIC T6 Gc (Non-Incendive)

Mounting: Head-mounted Typical Applications:
This configuration is used for interfacing with devices that don't have a standard 4-20 mA output, such as:

Converting signals from load cells (weight) or pressure transducers into a 4-20 mA loop.

Interfacing with third-party equipment that only has a voltage output.

Adding HART capability to an existing voltage-based signal path.

Providing intrinsic safety isolation for a voltage signal entering a hazardous area.