YOKOGAWA

The Yokogawa UT35A-001-11-00 is a Signal Conditioner / Isolator designed for use with RTD (Resistance Temperature Detector) sensors, specifically Pt100.<br /> Its primary function is to accept the weak and noise-sensitive resistance signal from an RTD, electrically isolate it from the source to prevent ground loops and noise interference, convert it into a robust, standardized analog output signal (such as 4-20 mA), and transmit this signal to a PLC, DCS, or other control/monitoring system.

9864

YOKOGAWA

The Yokogawa UT55A-020-11-00/DR is a Dual-Channel Signal Conditioner / Isolator designed to handle DC current/voltage input signals.<br /> Its primary function is to accept two independent standard analog signals (e.g., from transmitters, sensors, or other control devices), provide electrical isolation between each input channel, and between the inputs and the outputs. It then converts and transmits each signal as a robust, standardized analog output signal to a PLC, DCS, or other control/monitoring system.

5273

YOKOGAWA

The Yokogawa UT52A-010-11-00 is a 72x72mm Digital Indicating Controller from the UTAdvanced series. This model is designed for applications requiring a larger display and a combination of precise low-voltage signal measurement with robust relay-based control and alarm functionality.

6881

YOKOGAWA

The Yokogawa UT35A-010-01-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is specifically configured for process control applications involving low DC voltage signals and requires a proportional analog output for precise control.

5870

YOKOGAWA

The Yokogawa UT35A-000-10-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is a versatile and cost-effective solution designed for basic process control applications where the input is a standard analog current signal and the output requires simple relay-based actuation.

9608

YOKOGAWA

The Yokogawa UT35A-100-10-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is a specialized variant designed for process control applications where the measured variable is a DC voltage signal, particularly common in environments with potential electrical noise.

4246

YOKOGAWA

The Yokogawa UT35A-203-10-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is a specialized variant designed for precise position or motion control applications, typically using a potentiometer or a position transmitter as the feedback sensor.

3392

YOKOGAWA

The Yokogawa UT35A-000-11-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is specifically configured for process control applications where the measurement signal is a standard analog current or voltage loop, rather than a temperature sensor.

3200

YOKOGAWA

The Yokogawa UD320-00 is a Single-Loop Programmable Controller from the UD series. It is a versatile and compact device designed for advanced regulatory control, sequence control, and data acquisition in a wide range of industrial applications.

6229

YOKOGAWA

The Yokogawa UM33A-000-11 is a Compact Digital Indicator from the UM series. Unlike the UT controllers, the UM series is primarily designed for measurement and monitoring, not for control. This model is a basic, cost-effective solution for displaying process variables from a standard analog signal.

2444

YOKOGAWA

The Yokogawa UT55A-001-10-00 is a 96x96mm Square Digital Indicating Controller from the UTAdvanced series. This model is designed as a highly versatile, universal controller for complex process control and monitoring tasks, offering a larger display and more advanced functionality than the 48x48mm UT35A models.

3491

YOKOGAWA

The Yokogawa UT35A-JHG-01-NN is a 48x48mm Digital Indicating Controller from the UTAdvanced series. This model is a specialized variant pre-configured for high-temperature applications with a specific sensor type.

8091