Detailed Specifications Table
Category Specification
Model Code UT35A-000-10-00
Input Type Universal Analog Input (Default: 4-20mA)
• DC Current: 4 to 20 mA (default), 0 to 20 mA, etc.
• Note: Capability for voltage input may be available via software configuration, but the hardware is optimized for current loop.
Display • Type: High-brightness Red LED
• Primary Display (PV): 4-digit, 0.36" (9.2mm) height
• Secondary Display (SV): 4-digit, 0.36" (9.2mm) height
Control Output -10-: 1 point of Relay Output
• Type: SPST-NO (Single Pole, Single Throw - Normally Open)
• Contact Rating: 250V AC, 3A (resistive load)
• Function: Used for main control (ON/OFF or PID).
Alarm Output None (This model has only one relay, used for control).
Communication -00: None
• This model does not have a built-in communication port.
Power Supply 100 to 240 V AC (+10%, -15%), 50/60 Hz
Power Consumption Approx. 6 VA max
Accuracy ±0.3% of span ±1 digit
Sampling Period 200 ms
Control Action ON/OFF, Standard PID (with auto-tuning)
Electrical Isolation • Input: Photocoupler isolation
• Output Relay: Between coil and contact
• Power: Between power supply and all other terminals
Ambient Temperature 0 to 50°C (32 to 122°F)
Ambient Humidity 5 to 95% RH (non-condensing)
Installation • Panel Cutout: 45.5 x 45.5 mm (1.79" x 1.79")
• Panel Thickness: 1 to 10 mm (0.04" to 0.39")
• Standard: DIN 48x48mm
Weight Approx. 200 g (0.44 lbs)