Detailed Specifications Table
Category Specification
Model Code UT35A-100-10-00
Input Type DC Voltage Input
• Type: DC Voltage
• Default Range: Typically 1 to 5V DC or 0 to 10V DC (software-selectable). Other ranges may be available through configuration.
Display • Type: High-brightness Red LED
• Primary Display (PV): 4-digit, 0.36" (9.2mm) height
• Secondary Display (SV): 4-digit, 0.36" (9.2mm) height
Control Output 1 -10-: Relay Output 1
• Type: SPST-NO (Single Pole, Single Throw - Normally Open)
• Contact Rating: 250V AC, 3A (resistive load)
• Function: Used for main control (e.g., ON/OFF or PID).
Control/Alarm Output 2 -10-: Relay Output 2
• Type: SPST-NO (Same specifications as Output 1)
• Function: Can be configured as a second control output or as a programmable alarm.
Communication -00: None
• This model does not have a built-in communication port.
Power Supply 100 to 240 V AC (+10%, -15%), 50/60 Hz
Power Consumption Approx. 6 VA max
Accuracy ±0.3% of span ±1 digit
Sampling Period 200 ms
Control Action ON/OFF, Standard PID, 2-PID (with auto-tuning)
Electrical Isolation • Input: Photocoupler isolation
• Output Relays: Between coil and contact
• Power: Between power supply and all other terminals
Ambient Temperature 0 to 50°C (32 to 122°F)
Ambient Humidity 5 to 95% RH (non-condensing)
Installation • Panel Cutout: 45.5 x 45.5 mm (1.79" x 1.79")
• Panel Thickness: 1 to 10 mm (0.04" to 0.39")
• Standard: DIN 48x48mm
Weight Approx. 200 g (0.44 lbs)