IMMFP03 BAILEY

It will automatically match so that the voltage related to the two voltage sources will be applied for measurement. The line voltage will be used between two sources, and if one or both sources only have an additional voltage, that voltage will be used. For example, if the auxiliary voltage is programmed as VAG, the synchronous detection element will automatically connect that specific voltage to the auxiliary voltage terminal, and then use this auxiliary voltage to detect the synchronization status. If using a single CT/VT module for phase voltage and additional voltage, ensure that only the additional voltage is used on one of the two power sources for synchronous detection

The automatic reclosing scheme is used on transmission lines, where the circuit breaker can be operated in single-phase and three-phase modes, as well as a single circuit breaker or two pre configured circuit breakers. The automatic reclosing scheme provides four modes with different action times based on the type of fault. Each mode can be set to trigger coincidence twice. The second coincidence always overlaps the three phases and has an independent fixed delay

TOKYO SEIMITSU MODEL DS-110C

NIKON FBU-01 FEED BACK UNIT NIPPON KOGAKU

FOXBORO ANALOG I/P MS-3A2-R2DP REPAIRED BY PCS SERVICES

MURATA MURATEC MVL-STD-MEM-101 CN8-G1008-510 MEC-M1

TECH INDUCTION HEAT TREAT COIL INDUCTION HEATING COIL 5

DISCO INVERTER DV-503-3700PBD 15A 5.2 KVA

ELTEX ES51/E20A POWER SUPPLY
FESTO PRESSURE BOOSTER DPA-63-16 10BAR TO 16BAR 193392

POLYSPEDE PSV3-151 15HP INPUT 400-460V 60HZ