Parameter Value Product Range Lexium BSH / Lexium 32 series Product/Component Type Servo motor Motor Flange Size 70 mm Number of Motor Poles 6 Number of Motor Stacks 3 Rated Supply Voltage [Us] 480 V three-phase Nominal Output Power 750 - 1500 W (drive dependent) Nominal Speed 3000 - 8000 rpm (drive dependent) Maximum Mechanical Speed 8000 rpm Nominal Torque 1.12 - 2.44 N.m (drive dependent) Continuous Stall Torque 1.1 - 3.1 N.m (drive dependent) Peak Stall Torque 3.3 - 11.3 N.m (drive dependent) Continuous Stall Current 4.1 A Maximum Current Irms 15.2 - 17 A (drive dependent) Maximum Permanent Current 17 A Shaft End Keyed Shaft Diameter 14 mm Shaft Length 30 mm Key Width 20 mm Holding Brake Without Feedback Type Single-turn SinCos Hiperface Speed Feedback Resolution 131072 points/turn Torque Constant 0.78 N.m/A at 120 °C Back EMF Constant 49 V/krpm at 120 °C Rotor Inertia 0.58 kg.cm² Stator Resistance 2.7 Ohm at 20 °C Stator Inductance 13 mH at 20 °C Stator Electrical Time Constant 4.82 ms at 20 °C Switching Frequency 8 kHz Electrical Connection Rotatable right-angled connectors Type of Cooling Natural convection IP Degree of Protection IP50 standard Mounting Support International standard flange Range Compatibility Lexium 05, Lexium 15, Lexium 32 Length 220 mm Width 70 mm Centring Collar Diameter 60 mm Centring Collar Depth 2.5 mm Number of Mounting Holes 4 Mounting Holes Diameter 5.5 mm Circle Diameter of Mounting Holes 82 mm Maximum Radial Force Fr 730 N at 1000 rpm to 400 N at 6000 rpm Maximum Axial Force Fa 0.2 x Fr Net Weight 3.62 kg Continuous Power 1.7 W Second Shaft Without second shaft end Product Certifications / Compliance CE, RoHS compliant, REACh (contains lead - SVHC), Green Premium Country of Origin Germany Warranty 18 months