Parameter Value Product Range Lexium 32 / BSH series Product/Component Type Servo motor Motor Flange Size 40 mm Number of Motor Poles 10 Number of Motor Stacks 2 Rated Supply Voltage [Us] 400 V Continuous Power 398 W Nominal Output Power 275 W (480V), 289 W (400V), 152 W (230V) Continuous Stall Current 1.5 A Maximum Current Irms 6 A (depending on drive) Continuous Stall Torque 0.38 N.m Peak Stall Torque 1.37 N.m Nominal Torque 0.292 - 0.364 N.m (depending on drive) Nominal Speed 4000 - 9000 rpm (depending on drive) Maximum Mechanical Speed 10000 rpm Shaft End Keyed Shaft Diameter 8 mm Shaft Length 25 mm Key Width 12 mm Holding Brake Without Feedback Type Single-turn SinCos Hiperface Speed Feedback Resolution 32768 points/turn Torque Constant 0.253 N.m/A at 120 °C Back EMF Constant 18 V/krpm at 20 °C Rotor Inertia 0.0419 kg.cm² Stator Resistance 11.6 Ohm at 20 °C Stator Inductance 12.8 mH at 20 °C Stator Electrical Time Constant 1.1 ms at 20 °C Switching Frequency 8 kHz Electrical Connection Rotatable right-angled connectors Type of Cooling Natural convection IP Degree of Protection IP50 standard Mounting Support International standard flange Range Compatibility Lexium 32 servo drives Length 93.4 mm Centring Collar Diameter 30 mm Centring Collar Depth 2.5 mm Circle Diameter of Mounting Holes 46 mm Number of Mounting Holes 4 Mounting Holes Diameter 4.5 mm Net Weight 0.6 kg Maximum Axial Force Fa 0.2 x Fr Second Shaft Without second shaft end Sustainable Offer Status Green Premium product