Technical Parameters (Specifications) Note: Based on the part number breakdown: LXM62: Lexium 62 multi-axis servo drive series DD: Likely indicates the drive type or power section 27: Probably indicates the current rating (27 A) F21000: Likely indicates specific options or firmware version Electrical Data Product Type: Multi-axis servo drive module Rated Supply Voltage: 400...480 V AC (3-phase) via common DC bus power supply DC Bus Voltage: 560...800 V DC (from common power supply) Rated Current: 27 A (continuous) Peak Current: Approximately 54 A (for short durations during acceleration) Motor Compatibility Compatible Motors: Lexium BSH, BPH, BMH, BMH series servo motors Motor Types: Synchronous (PMSM) and asynchronous servo motors Feedback: Resolver, SinCos Hiperface, EnDat, or incremental encoder (depending on option cards) Control & Performance Control Modes: Position, speed, and torque control Communication Protocols: SERCOS III (digital fiber optic ring) for high-speed deterministic motion control Safety Functions: STO (Safe Torque Off) SIL 3 integrated (additional safety functions available with option modules) Programming: CANopen DS402 profile, IEC 61131-3 motion function blocks Interfaces Digital Inputs: Configurable for limit switches, homing, etc. Digital Outputs: Configurable for brake control, ready status, etc. Encoder Output: Emulated encoder output for master-slave applications Option Slots: For additional fieldbus or feedback modules Environmental & Mechanical Degree of Protection (IP): IP20 (conforming to IEC 60529) Mounting Mode: Side-by-side mounting on DIN rail or panel (book-form design) Cooling: Forced convection (integrated fan) Ambient Air Temperature for Operation: 0...50 °C (with derating above 40 °C) Dimensions (W x H x D): Approximately 70 mm x 300 mm x 240 mm (typical for 27A module) Net Weight: Approximately 3.5 kg Certifications Standards: CE, UL, cUL, TÜV