Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: R050S113NIAUEZZZZ Series: R-Series (Hygienic/Sanitary Coriolis Flow Meter) Sensor Size: R050 (Typically 1/2 inch or DN15 line size) Flow Tube Material: S indicates 316L Stainless Steel (wetted parts) Enclosure Material: 113 typically indicates a standard hygienic-grade enclosure with polished finishes Process Connection: NI typically represents a sanitary clamp connection (Tri-Clamp type) Connection Size: A indicates a specific size (e.g., 1/2 inch or 3/4 inch sanitary clamp) Connection Standard: U indicates the connection standard (likely 3-A or ISO sanitary standard) Case Option: E indicates a specific case material or finish for hygienic applications Core Processor/Electronics: ZZZZ indicates this is a sensor-only unit (no attached transmitter) Hazardous Area Approvals: Basic approvals for general purpose (specific approvals depend on full code) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., Brix, Plato, concentration) Flow Tube Configuration: Single continuous straight or curved tube design (fully drainable) Surface Finish: Electro-polished, hygienic-grade finish (Ra < 0.8 µm typical) Accuracy (Mass Flow): Up to ±0.10% of rate (standard R-Series performance) Accuracy (Density): Up to ±0.001 g/cm³ (typical for hygienic applications) Repeatability (Mass Flow): Up to ±0.05% of rate Nominal Flow Rate (Water): Typically up to 6,000 kg/h (13,200 lb/h) for R050, depending on fluid properties Fluid Temperature Range: -50°C to 150°C (-58°F to 302°F) standard for hygienic applications Pressure Rating: Depends on clamp connection, typically up to 1,000 psi (69 bar) for sanitary clamps Enclosure Rating: NEMA 4X (IP66/67) - Washdown capable Certifications: Designed to meet 3-A Sanitary Standards and EHEDG guidelines