Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: F200S369CCAPMZZZZ Series: F-Series Coriolis Flow Meter (General-purpose design) Sensor Size: F200 (Typically 2 inch / DN50 line size) Flow Tube Material: S indicates 316L Stainless Steel (wetted parts) Enclosure Material: 369 typically indicates a standard rugged enclosure (polyester powder-coated aluminum) Enclosure Rating: NEMA 4X (IP66/67) - Suitable for outdoor and harsh environments Process Connections: CC typically represents 2 inch Class 150 or 300 Raised Face flanges (316/316L Stainless Steel) Core Processor/Electronics: APMZZZZ indicates this is a sensor-only unit (no attached transmitter) with standard approvals Hazardous Area Approvals: Designed for general purpose and Zone 1/Division 2 hazardous locations (standard) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., concentration) Flow Tube Configuration: Dual-tube, split-flow design for reduced pressure drop Accuracy (Mass Flow): Up to ±0.10% of rate (standard F-Series performance) Accuracy (Density): Up to ±0.001 g/cm³ (typical) Repeatability (Mass Flow): Up to ±0.05% of rate Nominal Flow Rate (Water): Typically up to 60,000 kg/h (132,000 lb/h) for F200, depending on fluid properties and pressure rating Turndown: High turndown ratio (typically 100:1 or better) Fluid Temperature Range: -40°C to 204°C (-40°F to 400°F) standard range Pressure Rating: Depends on flange rating (Class 150 or Class 300 typically) Flow Tube Material: 316L Stainless Steel Case Material: Low-copper aluminum with polyester paint