SD1050A-2/90S0057_YOKOGAWA_PRODUCT_吉林易择科技技术发展有限公司

The Yokogawa SD1050A-2/90S0057 is a Digital Output Module and its associated Terminal Block Unit for the Yokogawa FA-M3 series of Programmable Logic Controllers (PLCs).<br /> <br /> This module is a critical interface component that allows the PLC's CPU to control external field devices. It receives digital commands (ON/OFF) from the CPU via the backplane and uses them to switch solid-state outputs that can drive loads such as solenoid valves, motor starters, contactors, indicator lamps, and other AC-powered devices.

Grace +86 13600179521

DESCRIBE

Key Technical Specifications
Parameter Specification
Type Digital Output (DO) Module
Compatible System Yokogawa FA-M3 Series PLC
Mounting Installs in an FA-M3 series I/O rack (e.g., M3SE-BSU□ or M3SP-BSU□ base unit)
Number of Points 16 points (This is a standard configuration for this series)
Output Type Solid-State (Triac) AC Output
Rated Load Voltage 100-120 V AC (This is the typical voltage for this series)
Max. Load Current 0.5 A per point (Typical)
Max. Inrush Current 5 A (for 20 ms max)
Leakage Current < 2 mA (Typical)
Voltage Drop < 1.6 V AC (Typical)
Response Time ON: ≈ 1 ms, OFF: ≈ 10 ms (Typical, load dependent)
Isolation Photocoupler isolation between internal logic and triac outputs.
Internal Consumption 5 V DC: ≈ 200 mA (from backplane, typical)
Fusing Fuse protection per point or per group (refer to manual)
Connection Via the provided 90S0057 terminal block unit (screw terminal type)

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com