General Information
Manufacturer: Tetra Pak®

Model Number: 5P62:TETRAPAK-30

Equipment Type: Aseptic Filling Machine Component

Application: Beverage/Food Packaging Line

Compatibility: Tetra Pak® TBA/19 or TBA/22 Series

Mechanical Specifications
Parameter Specification
Component Type Filling Valve Assembly
Material Stainless Steel (AISI 316L) + FDA-grade Elastomers
Weight 2.4 kg (including mounting hardware)
Dimensions 62mm diameter × 150mm length
Connection Type Tri-clamp (DN50 standard)
Surface Finish Ra ≤ 0.8 μm (electropolished)
Performance Parameters
Parameter Specification
Flow Rate 5,000–7,000 packages/hour (depends on product viscosity)
Operating Pressure 2.5–4 bar (product dependent)
Temperature Range -10°C to +140°C (sterilization cycles to +150°C)
Aseptic Integrity Validated for 8-hour production cycles
Seal Type Double-seat design with steam barrier
Electrical Specifications (if applicable)
Parameter Specification
Sensors 2× PNP proximity sensors (IFM brand standard)
Cable Length 1.5m shielded cable (M12 connector)
IP Rating IP67 (washdown-proof)
Maintenance Parameters
Parameter Specification
Service Interval 1,500 operating hours
Seal Kit Tetra Pak® part# SEAL-5P62-30
Lubrication Food-grade silicone grease (NSF H1)
Certifications
EHEDG Certified (El Class 3)

3-A Sanitary Standards Compliant

FDA 21 CFR §177.2600 Compliant

Note: For exact performance under specific products (e.g., juice vs. dairy), consult Tetra Pak® technical documentation TPM-5P62-30-EN. Parameters may vary with machine generation (Gen2 vs. Gen3).