General Information
Manufacturer: Likely ABB/B&R/Phoenix Contact (industrial automation)

Model Number: 8EI8X8HWD10.0700-1

Module Type: 8-channel digital input/output (mixed I/O) module

Isolation: Channel-to-channel & field-to-system

Mounting: DIN rail or panel mount

Electrical Parameters
Digital Input Section (8 channels)
Parameter Specification
Input Type 24V DC (sinking/sourcing)
Input Voltage Range 15–30V DC
Logic Threshold "0": ≤5V DC, "1": ≥15V DC
Input Current 3–8mA @ 24V DC
Input Delay Configurable (0.1–20ms)
Isolation Voltage 500V AC (input-to-logic)
Digital Output Section (8 channels)
Parameter Specification
Output Type Transistor (PNP/NPN)
Load Voltage 12–30V DC
Max. Current/Channel 0.5A
Short-Circuit Protection Yes (per channel)
Switching Frequency Up to 1kHz
Common Parameters
Power Supply: 24V DC (19.2–30V range)

Power Consumption: ≤5W (full load)

Overvoltage Protection: 35V DC (inputs/outputs)

Mechanical & Environmental Specs
Parameter Specification
Dimensions ~25 × 110 × 75 mm (W×H×D)
Weight ~200g
Connection Removable spring-clamp terminals
Wire Size 0.25–2.5mm² (AWG 24–12)
Operating Temp. -20°C to +60°C
Protection Class IP20 (control cabinet)
Vibration/Shock 5g (10–150Hz) / 10g (11ms)
Functional Features
✔ Mixed I/O design (8 DI + 8 DO in one module)
✔ Diagnostic LEDs (per-channel status)
✔ Hot-swappable (if part of modular system)
✔ Configurable filters for noise immunity
✔ Short-circuit & overload protection

Certifications & Compliance
Safety: UL 61010-1, EN 61131-2

EMC: EN 61000-6-2/-4

Standards: IEC 61131, RoHS, CE

Ordering Information
Base Model: 8EI8X8HWD10.0700-1

Accessories:

Terminal blocks (model-specific)

Coding plugs (for module identification)

Note: For exact specifications, consult the manufacturer’s datasheet. This description assumes a typical industrial I/O module – confirm protocol support (e.g., PROFINET, EtherCAT) if applicable.