Technical Specifications (Parameters) Parameter Specification Product Type Soft starter Product Range Altistart 48 Device Connection In the motor supply line (inline) Motor Type Asynchronous motors Supply Voltage (Ue) 208...690 V AC - 15...10 % Supply Frequency 50...60 Hz - 5...5 % Control Voltage (Us) 110...230 V AC 50/60 Hz Rated Current (Ie) 32 A Motor Power (kW) Standard application: 15 kW at 400 V, 22 kW at 690 V Severe application: 11 kW at 400 V, 18.5 kW at 690 V Motor Power (hp) Standard application: 20 hp at 460 V, 25 hp at 575 V Severe application: 15 hp at 460 V, 20 hp at 575 V Utilisation Category AC-53A Protection Type Motor thermal protection, starter thermal protection, phase failure Communication Port Protocol Modbus Physical Interface RS485 multidrop with 1 RJ45 connector Discrete Input Number 5 (4 logic, 1 PTC) Discrete Output Type 3 relay outputs (fault, end of starting, motor powered), 2 logic outputs Analogue Output Type 0-20 mA or 4-20 mA configurable Degree of Protection (IP) IP20 Dimensions (W x H x D) 160 mm x 275 mm x 190 mm Net Weight 4.9 kg Ambient Air Temperature for Operation -10…40 °C (without derating) 40…60 °C (with current derating of 2% per °C) Ambient Air Temperature for Storage -25…70 °C Operating Altitude <= 1000 m without derating Standards EN/IEC 60947-4-2 Product Certifications CE, UL, CSA, DNV, CCC, GOST, C-Tick, NOM 117, SEPRO, TCF Country of Origin Indonesia Sustainable Status Green Premium product (RoHS/REACh compliant)