Technical Specifications (Parameters) Parameter Specification Product Type High-speed counter/timer module Product Range Modicon Premium Automation Platform Number of Channels 2 independent channels Counting Frequency Up to 40 kHz per channel Cycle Time 5 ms Input Compatibility 2/3-wire proximity sensors (PNP/NPN), incremental encoder (10-30 V totem pole, 5 V DC RS422) Input Voltage 24 V (18 mA for sensors, 7 mA for auxiliary input, 18 mA for encoder) Voltage State 1 Guaranteed ≥ 11 V (sensors/auxiliary), ≥ 2.4 V (encoder) Current State 1 Guaranteed ≥ 6 mA (sensors/auxiliary), ≥ 3.7 mA (encoder) Output Voltage 24 V DC Nominal Output Current 0.5 A Digital Outputs 4 reflex outputs Response Time < 2.5 ms sensor voltage at loss of 24 V auxiliary input Power Dissipation 4.5 to 6 W Current Consumption 280 mA at 5 V DC, 30 mA at 24 V DC Protection Features Thermal tripping, current limiter, overvoltage (zener diode), reverse polarity Local Signalling 1 green LED (RUN), 1 red LED (external fault), 1 red LED (internal fault), 2 green LEDs (channel diagnostics) Electrical Connection 1 HE-10 connector (20 pins), 2 SUB-D 15 connectors Module Format Standard Mounting Backplane or rack mount Net Weight 0.32 kg Operating Temperature 0…60 °C Storage Temperature -25…70 °C Relative Humidity 5…95% without condensation Standards EN/IEC 61131 Certifications CE, UL, CSA Lifecycle Status Discontinued (2018); service support until 2026 Replacement Product BMXEHC0200 (for Modicon M340 systems)