Technical Parameters (Specifications) BRS3: Lexium BRS3 series servo motor 68: Frame size (68 mm flange) H: Winding type / voltage class (High voltage) 130: Rated speed (1300 rpm? or 1300? - typically indicates speed/performance variant) A: Feedback type (Resolver or encoder variant) B: Shaft option (Standard shaft with key or smooth shaft) A: Brake option (With or without holding brake) Electrical Data Product Type: Brushless servo motor Rated Supply Voltage: 400...480 V AC (typical for Lexium drives) Rated Power: [Typically 1.0...2.0 kW range for this frame size - verify] Rated Current: [Depends on specific winding - verify] Peak Current: [Approximately 2-3x rated current - verify] Motor Specifications Motor Type: Brushless synchronous servo motor (PMSM) Frame Size: 68 mm flange (IEC standard) Shaft: Standard round shaft with key (unless specified otherwise) Holding Brake: Optional (24 V DC) - check variant Feedback: Resolver or SinCos Hiperface encoder (depending on variant) Insulation Class: Class F (155°C) Protection: Thermal protection (PTC thermistor) Performance Rated Speed: [Typically 1500, 2000, or 3000 rpm - verify] Maximum Speed: [Typically 5000-6000 rpm - verify] Rated Torque: [Depends on speed - typically 4-8 Nm range - verify] Peak Torque: [Approximately 3x rated torque - verify] Torque Constant (Kt): [Depends on winding - verify] Voltage Constant (Ke): [Depends on winding - verify] Rotor Inertia: [Depends on motor length - verify] Mechanical Mounting Mode: Flange mount (direct to machine) Cooling: Natural convection (surface cooling) Shaft Seal: Standard (for IP65 protection) Balancing: Half-key balancing (standard) Flange Accuracy: Precision machined for accurate mounting Environmental Degree of Protection (IP): IP65 (motor housing) except shaft extension and connector Ambient Air Temperature for Operation: 0...40 °C (with derating up to 50 °C) Ambient Air Temperature for Storage: -20...70 °C Humidity: 10...90% (non-condensing) Vibration Resistance: Conforms to IEC 60068-2-6 Shock Resistance: Conforms to IEC 60068-2-27 Certifications Standards: CE, UL, cUL