Parameter Specification Brand & Range Schneider Electric - Modicon STB (Advantys) Product Type Digital Input Module (Transistor, Sourcing / PNP) Number of Channels 16 Input Type Sourcing (PNP) - The field device provides the 24V source current into the input point. (Compatible with 3-wire PNP sensors and dry contacts switched to 24V). Supply Voltage 24V DC (Nominal) for the input circuitry, supplied externally to the module's power segment. Logic "1" Signal Level 15V to 30V DC Logic "0" Signal Level -3V to 5V DC Input Current (per point) Typically 4 mA @ 24V DC Isolation 500V RMS between field side and system (bus) side. Isolation in groups of 8 inputs. Response Time Configurable via the NIM software: Fast: ≤ 1 ms (for high-speed signals) Standard: ≤ 3 ms (default, for typical applications) Slow: ≤ 20 ms (for noisy environments, with filtering) Connection Type Removable screw-clamp terminal block Wiring Cross-Section 0.2 - 2.5 mm² (AWG 24-12) Indicators per Channel Green LED for each of the 16 channels (ON = Logic "1"/Input Active) Module Indicators PWR (green): Power present on the field side. BF (red): Bus Fault indicator (reports communication errors from the island bus controller). Communication Bus Part of an STB island, connected via the STB island bus (NIM - Network Interface Module defines the protocol). Mounting On 35 mm symmetrical DIN rail (EN 60715) Enclosure / IP Rating IP20 (For mounting inside a protected control panel) Width (Modular) STB Standard Module Width (Typically equivalent to 2 or 3 standard terminal blocks, approx. 22.5mm). Consult STB catalog for exact dimension. Ambient Temperature • Operation: 0°C to +60°C • Storage: -25°C to +70°C Relative Humidity 10% to 95% (non-condensing) Pollution Degree 2 Standards & Certifications CE, cULus listed, RoHS compliant. Conforms to IEC 61131-2. Compatible System Modicon STB (Advantys) Distributed I/O Island. Requires an STB NIM (Network Interface Module) and an STB PSB (Power Supply Base) or equivalent.