Specifications 1. General Information Parameter Specification Product Family Modicon M580 ePAC Catalog Number BMXDAO1605 Description 16-channel Analog Output Module Signal Type Current and Voltage Output Channels 16 analog outputs Isolation Individual channel isolation Module Width Double module (48 mm) Hot Swap Support Yes 2. Electrical Specifications - Voltage Output Parameter Specification Output Range 0-10 VDC or ±10 VDC (software selectable) Resolution 16 bits (15 bits + sign) Accuracy ±0.1% of full scale at 25°C Temperature Drift ±50 ppm/°C Load Impedance ≥ 1 kΩ Maximum Output Current 20 mA per channel Update Rate 10 ms per channel (all channels) Settling Time 1 ms to 0.1% of final value 3. Electrical Specifications - Current Output Parameter Specification Output Range 0-20 mA or 4-20 mA (software selectable) Resolution 15 bits (14 bits + sign for 4-20 mA) Accuracy ±0.1% of full scale at 25°C Temperature Drift ±50 ppm/°C Load Impedance ≤ 500 Ω (0-20 mA), ≤ 750 Ω (4-20 mA) Compliance Voltage 24 VDC maximum Update Rate 10 ms per channel (all channels) 4. Physical & Mechanical Parameter Specification Dimensions (H × W × D) 90 × 48 × 127 mm Weight 0.35 kg Connector Type Two removable screw terminal blocks (20 positions each) Wire Gauge 0.2 - 2.5 mm² (24-12 AWG) Terminal Torque 0.5 - 0.6 Nm Mounting DIN rail mounting via M580 backplane LED Indicators • Module status (green/red) • Channel status LEDs (8 groups of 2 channels) 5. Environmental Specifications Parameter Specification Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 10% to 95% (non-condensing) Altitude Up to 3000 m without derating Protection Rating IP20 (for installation in enclosure) Vibration 3.5 mm (5-8.4 Hz), 9.8 m/s² (8.4-150 Hz) Shock 147 m/s² (11 ms duration) 6. Power Specifications Parameter Specification Backplane Power 5 VDC from M580 backplane Power Consumption • From backplane: 3.5 W max • Field side: 15 W max (all channels active) Isolation 1500 VAC between field and logic side 7. Diagnostic Features Feature Description Module Diagnostics • Power supply monitoring • Configuration error detection • Communication fault detection Channel Diagnostics • Wire break detection (current mode) • Short-circuit detection • Overload detection • Under-range/Over-range detection Status Indication • Per-channel group LED status • Real-time status in software Calibration Software calibration capability 8. Performance Specifications Parameter Specification PLC Compatibility Modicon M580 ePAC platform Configuration Software EcoStruxure Control Expert Communication M580 high-speed backplane Data Refresh Rate Synchronous with controller scan cycle Response Time < 10 ms for full scale change 9. Wiring Configuration Terminal Block Function TB1 • Channels 0-7 outputs • +24V power for group 1 • 0V common for group 1 TB2 • Channels 8-15 outputs • +24V power for group 2 • 0V common for group 2 10. Configuration Options Parameter Options Output Type 0-10 V, ±10 V, 0-20 mA, 4-20 mA Update Rate Configurable per channel group Fault State Hold last value, go to preset value Scaling User-defined scaling factors Filter Configurable output filtering 11. Safety & Certifications Parameter Specification Safety Standards UL 508, CSA C22.2 No. 142, IEC 61131-2 EMC Standards EN 61326-1, IEC 61000-6-2, -6-4 Industrial Standards CE, UKCA, RCM, RoHS Safety Integrity Suitable for use in SIL applications