Specifications 1. General Information Parameter Specification Product Family Altivar 320 - Variable Speed Drives Catalog Number ATV320U11M3C Description 1.1 kW Compact Variable Frequency Drive Motor Type Asynchronous and Synchronous motors Power Rating 1.1 kW (1.5 HP) Form Factor Compact booksize Mounting Side-by-side without derating IP Rating IP20 / IP21 top 2. Power Specifications Parameter Specification Input Supply Three-phase: 200-240 VAC (-15% / +10%) Input Frequency 50/60 Hz (±5%) Output Three-phase: 0 - Input voltage Output Frequency 0.5 - 599 Hz Rated Output Current 5.5 A (at 240V, 2.5 kHz switching) Peak Output Current 8.3 A (150% for 60 seconds) Apparent Power 2.3 kVA at 240V Maximum Output Voltage 100% of input voltage 3. Performance Specifications Parameter Specification Control Method • Sensorless Flux Vector Control (standard) • V/F (Voltage/Frequency) • Energy Saving Switching Frequency 2-16 kHz (adjustable) Derating above 4 kHz Speed Range 1:100 (sensorless vector) Speed Accuracy ±0.2% of nominal speed Starting Torque 150% at 1 Hz (sensorless vector) Torque Accuracy ±5% Braking Torque Up to 150% with braking resistor Response Time 2 ms typical 4. Communication Specifications Parameter Specification Integrated Ports • Modbus Serial (RJ45) • CANopen (RJ45) • Analog/Digital I/O Optional Communication Cards • EtherNet/IP • PROFINET • EtherCAT • DeviceNet • PROFIBUS DP V1 Programming Port RJ45 (Modbus/CANopen) Web Server Not available (requires optional Ethernet card) 5. I/O Specifications Parameter Specification Digital Inputs 6 programmable inputs (24 VDC) • Sink/Source configurable • 4 fast inputs (40 kHz) • Functions: Run, Stop, Preset speeds, Ramp switching, etc. Digital Outputs 3 programmable outputs • 1 relay output (1 NO + 1 NC) 5A/250VAC • 2 open collector outputs 100 mA Analog Inputs 3 programmable inputs • 2 voltage inputs: 0-10 VDC, 0-5 VDC • 1 current input: 0-20 mA, 4-20 mA • 11-bit resolution Analog Outputs 1 programmable output • 0-20 mA, 4-20 mA • 10-bit resolution • Functions: Motor speed, current, torque, etc. Relay Outputs 1 (NO/NC) + 1 optional via card PTC Input Motor thermal protection probe input