Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: CMF300M355NRAAEZZ Series: ELITE Series Coriolis Flow Meter (Premium performance) Sensor Size: CMF300 (Typically 3 inch / DN80 line size) Flow Tube Material: M indicates C-22 Alloy (Hastelloy C-22 equivalent) - Superior corrosion resistance Enclosure Material: 355 typically indicates a standard, rugged enclosure (polyester powder-coated aluminum) Enclosure Rating: NEMA 4X (IP66/67) - Suitable for outdoor and harsh environments Process Connections: NRA typically represents 3 inch Class 300 or 600 Raised Face flanges (C-22 Alloy material consistent with wetted parts) Core Processor/Electronics: AEZZ indicates this is a sensor-only unit (no attached transmitter) with standard approvals Hazardous Area Approvals: Designed for Zone 1/Division 1 hazardous locations (standard for ELITE series) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., concentration, viscosity) Flow Tube Configuration: Dual-tube design for superior balance and accuracy Accuracy (Mass Flow): Up to ±0.05% of rate (ELITE performance) Accuracy (Density): Up to ±0.0005 g/cm³ (ELITE performance) Repeatability (Mass Flow): Up to ±0.025% of rate Nominal Flow Rate (Water): Typically up to 150,000 kg/h (330,000 lb/h) for CMF300, depending on fluid properties and pressure rating Turndown: Exceptionally high (up to 1000:1) Fluid Temperature Range: -240°C to 204°C (-400°F to 400°F), depending on installation and electronics Pressure Rating: Up to 6,000 psi (414 bar) depending on process connection Flow Tube Material: C-22 Alloy (Hastelloy C-22) Case Material: Low-copper aluminum with polyester paint