Parameters (Specifications) Brand: Emerson (Micro Motion) Model Number: CMF100L422N2BAMZZZ Series: ELITE Series Coriolis Flow Meter (Premium performance) Sensor Size: CMF100 (Typically 1 inch / DN25 line size) Flow Tube Material: L indicates specialized material, typically: Alloy C-22 (Hastelloy C-22) for superior corrosion resistance Or a specialized variant for cryogenic/low-temperature service Enclosure Material: 422 typically indicates a specific rugged enclosure configuration Process Connections: N2B typically represents a specific flange type and size (e.g., 1 inch Class 300 or 600 Raised Face flanges) Core Processor/Electronics: AMZZZ indicates this is a sensor-only unit with standard electronics compatibility and approvals Hazardous Area Approvals: Designed for Zone 1/Division 1 hazardous locations (standard for ELITE series) Measured Variables: Mass Flow, Volume Flow, Density, Temperature, and derived measurements (e.g., concentration, viscosity) Flow Tube Configuration: Dual-tube design for superior balance and accuracy Accuracy (Mass Flow): Up to ±0.05% of rate (ELITE performance) Accuracy (Density): Up to ±0.0005 g/cm³ (ELITE performance) Repeatability (Mass Flow): Up to ±0.025% of rate Nominal Flow Rate (Water): Typically up to 15,000 kg/h (33,000 lb/h) for CMF100, depending on fluid properties and pressure rating Turndown: Exceptionally high (up to 1000:1) Fluid Temperature Range: Dependent on "L" material specification: Standard range: -240°C to 204°C (-400°F to 400°F) If cryogenic variant: Optimized for lower temperatures Pressure Rating: Up to 6,000 psi (414 bar) depending on process connection Flow Tube Material: Alloy C-22 (Hastelloy C-22) or specialized alloy Case Material: Low-copper aluminum with polyester paint