Specifications: Model: FIELDVUE DLC3100 Digital Level Controller Communication Protocol: HART 5/7 (Analog 4-20 mA with digital overlay) Power Supply: 16.5 to 42 V DC (Loop Powered) Ambient Temperature Range: -40° to 75°C (-40° to 167°F) Enclosure Rating: NEMA 4X / Type 6P / IP67 Mounting: Directly on the valve yoke or via a mounting bracket. Measurement & Performance: Measurement Technology: Guided Wave Radar (Tuned Waveguide) Measurement Range: Up to 6 meters (20 feet) Accuracy: Typically ±3 mm (±0.12 in) or 0.1% of selected range, whichever is greater. Update Time: < 1 second Control & Output: Control Output: Pneumatic, proportional to the measured level. Output Pressure Ranges: Selectable (e.g., 0.2-1.0 bar, 0.4-2.0 bar, 0.8-3.4 bar) [3-15, 6-30, 12-50 psi] Air Supply Pressure: 1.4 to 7.0 bar (20 to 100 psi), must be at least 0.35 bar (5 psi) above the required output pressure. Air Consumption: 0.14 Nm³/h (0.1 SCFM) @ 1.4 bar (20 psi) supply (no load) Control Action: Direct or Reverse acting (configurable). Control Algorithms: Proportional (P), Proportional-Integral (PI) Materials & Process Connection: Process Connection: 2-inch NPT or other flanged connections (dependent on the probe assembly). Probe Material: 316L Stainless Steel (standard), other alloys available. Cable / Conduit Entry: Two 1/2-inch NPT entries. Compatibility: Valves: Designed to work with Fisher and other brands of diaphragm control valves. Asset Management Systems: Fully compatible with Emerson's AMS Device Manager and other HART-based host systems for remote configuration and monitoring.