Parameters: Model Number: ABB E1N800 R400/630/800 3/4P Rated Voltage: AC 690 V (for three-phase systems) Rated Current: 400A, 630A, 800A (adjustable depending on the configuration) Rated Frequency: 50/60 Hz Number of Poles: 3P (three-pole) or 4P (four-pole) Protection Type: Long-Time Protection (L): Adjustable from 0.7 to 1.0 times rated current, offering protection against overload by monitoring prolonged overcurrent conditions. Short-Time Protection (S): Adjustable from 3 to 10 times rated current, with a time delay, providing protection from short-circuit faults while allowing motor startup. Instantaneous Protection (I): Provides instantaneous disconnection in case of severe short-circuit conditions, ensuring immediate protection from high fault currents. Ground Fault Protection (G): Ground fault protection (LSI) detects leakage currents, providing early warning and isolating the faulty section to prevent electrical hazards. Thermal Overload Protection: Continuously monitors the system's temperature, offering protection against sustained overload conditions that could cause overheating. Breaking Capacity (Icu): 50 kA at 400V, ensuring that the breaker can safely interrupt high fault currents without damage to the system. Mounting Type: DIN rail mountable or panel mountable for easy integration into motor control centers (MCCs), distribution panels, and electrical control systems. Protection Class: IP20 (for indoor use; additional external kits are available for more demanding environments). Weight: Approx. 10–20 kg, depending on the rated current and configuration. Dimensions (H x W x D): Approx. 300 x 200 x 180 mm (varies depending on rated current configuration). Control Voltage: 24 V DC (or 48 V DC depending on configuration) for remote control and monitoring features. Communication Protocols: Supports Modbus RTU, Profibus, and Ethernet communication for remote diagnostics and integration with PLC or SCADA systems. Auxiliary Contacts (Optional): Available for fault signaling, system status updates, and integration with automation control systems.