Technical Specifications / Parameters Parameter Specification Manufacturer Part Number VF000037 Product Type Non-Metallic (Plastic) Enclosure / Wireway / Junction Box Material High-Impact, Fiberglass-Reinforced Polyester (FRP) or equivalent robust thermoplastic. Provides excellent corrosion resistance. Color Gray (Standard ABB industrial gray) Protection Rating NEMA 4X / IP66 • Dust-tight (No ingress of dust) • Protected against powerful water jets from any direction. • X indicates corrosion resistance. Dimensions (Approx.) Refer to official drawing for exact size. Typical for a 6x8x4 inch or similar medium-sized trough. (Example only: ~150mm x 200mm x 100mm [H x W x D]) This must be verified. Mounting Multiple mounting options: typically includes mounting feet or flange with pre-molded holes for wall, panel, or DIN rail mounting inside. Cover Transparent or opaque hinged cover with a robust latch and integral gasket for secure, watertight sealing. Sealing Continuous, compressible silicone or EPDM gasket between base and cover. Drilling / Entry Pre-marked, knock-out entries (KO’s) or drilled entry points for cable glands/conduit fittings on multiple sides (top, bottom, sides). Internal Mounting May include pre-molded bosses, DIN rail mounting points (35mm), or a drilled mounting plate. Ambient Temperature Range Typically -40°C to +120°C (Storage/Operation, material dependent). Flammability Rating UL 94 V-0 or equivalent (Self-extinguishing). UV Resistance Yes, suitable for outdoor use (Material is UV-stabilized). Chemical Resistance Resistant to a wide range of oils, fuels, dilute acids, and alkalis. Standards Compliance UL Listed, CSA Certified, CE marked (as applicable). Meets NEMA 250, IEC 60529, UL 50E. Typical Applications • Field wiring junction boxes for motors and sensors. • Housing for PLC remote I/O stations. • Protection of terminal blocks in harsh environments. • Enclosure for small drives or power supplies. • Outdoor lighting control enclosures.