Technical Specifications: Parameter Category Specification Detail Model Designation ACS310-03E-17A2-4 Product Series ABB ACS310 General Purpose Drive Rated Power 7.5 kW (10 HP) Output Current 17.2 A (at 400V, continuous duty) Supply Voltage 3-phase, 380 - 480 V AC (±10%), 50/60 Hz Output Voltage 0 - Supply Voltage (Uin) Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (V/Hz) with programmable V/Hz curves (linear, quadratic, user-defined) Control Performance - Speed control range: 1:40 - Speed control accuracy: ±0.5% of maximum speed (20-50 Hz) - Starting torque: Up to 160% at 0.5 Hz - Torque boost: Adjustable (0-30%) Enclosure Rating IP20 / UL Type 1 (Open Chassis) - Must be installed in suitable enclosure Physical Frame Size R3 Key Features - Quick Setup Macros: 5 pre-defined application settings - Flying Start: Can catch rotating motors in both directions - Energy Optimizer: Reduces motor losses at light loads - Process PID Controller: Built-in for basic process control - Automatic DC Magnetization: Improves starting performance - Automatic Restart: Configurable after fault or power loss - Motor Thermal Protection: I²t model with PTC thermistor option Input/Output Configuration Digital Inputs (DI): 3 (24V DC, sink/source selectable, DI3 can be used as pulse input) Analog Input (AI): 1 (switchable 0-10V/0-20mA) Analog Output (AO): 1 (programmable 0-20mA or 0-10V) Relay Output (RO): 1 (changeover contact, 30V DC/250V AC, 2A) Additional I/O: Optional expansion modules available Communication Interfaces Standard: - Modbus RTU via RS-485 (terminals +A/-B) Optional (via adapters): - PROFIBUS DP - DeviceNet - CANopen - Ethernet (with optional modules) Protection Features Motor Protection: - Motor thermal overload (I²t) with separate motor models - Stall prevention (SUP/OL2) - Phase imbalance detection - Earth fault detection - Underload protection Drive Protection: - Short circuit (SC) - Overcurrent (OC, 200% for 60s) - Overvoltage/Undervoltage (OV/UV) - Heatsink overtemperature (OH) - IGBT temperature monitoring - Motor cable supervision - Input phase loss Energy Saving Features - Automatic Energy Optimizer (reduces magnetizing current) - ECO Mode for fan/pump applications - Sleep/Wake Function with timer - Power Factor: Typically >0.98 Braking Capability - DC Braking: Standard (torque 0-100%, time 0-60s) - Dynamic Braking: Requires optional brake resistor - Ramp Times: 0.1-1800s (acceleration/deceleration) Cooling System Forced air cooling with temperature-controlled fan Environmental Specifications Operating Temperature: -15°C to +50°C (5°F to 122°F) without derating Storage Temperature: -40°C to +70°C (-40°F to 158°F) Relative Humidity: <95% non-condensing Altitude: 0-1000m without derating (1% per 100m above 1000m) Vibration: 0.7G (5-200 Hz) Pollution Degree: 2 according to IEC 60664 Overvoltage Category: III Electrical Standards & Approvals Certifications: - CE compliant (EMC Directive 2014/30/EU, LVD 2014/35/EU) - cULus listed (UL508C) - RoHS compliant - EN/IEC 61800-3 compliant (EMC) - EN/IEC 61800-5-1 (Safety) Physical Dimensions & Weight Height: 243 mm (9.57 in) Width: 165 mm (6.50 in) Depth: 178 mm (7.01 in) Weight: 3.5 kg (7.7 lb) Mounting Requirements Clearances: - Above/Below: 100 mm minimum - Sides: 50 mm minimum - Mounting position: Vertical (recommended) Torque Settings: - Power terminals: 2.0 Nm - Control terminals: 0.5 Nm