Key Parameters Category Description / Value Product Line Eaton DILM Model Type DILM50-11N Rated Operational Current (Iₑ) at AC-3 50 A (For squirrel-cage motors: Starting, switching off during running) Rated Operational Power at AC-3 ~ 25 kW / 30 HP at 400V 50Hz Rated Operational Voltage (Uₑ) Up to 690 V AC, 50/60 Hz Rated Thermal Current (Iᵼₕ) 63 A Poles 3 (Main Contacts) Coil Control Voltage Standard factory setting is often 230V AC, 50/60Hz. However, this is a configurable parameter. The coil is available in a wide range of voltages (e.g., 24V, 110V, 120V, 220V, 230V, 240V, 380V, 400V, 415V, 500V, 525V, 690V AC/DC). The exact voltage must be confirmed by the order code sticker on the device itself. Utilization Categories AC-3: Squirrel-cage motors (starting, switching off during running) AC-1: Non-inductive or slightly inductive loads (e.g., heaters) Electrical Durability Millions of operations (dependent on load) Mechanical Durability ~ 10 - 15 million operations Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Mounting Snap-on mounting on 35 mm symmetrical top-hat rail (DIN rail) or via screw mounting using the integrated feet. Connection Cage Clamp terminal technology for easy wiring without tools (for cross-sections up to 16 mm²). Auxiliary Contacts Typically, at least 1 normally open (NO) + 1 normally closed (NC) auxiliary contact is included as standard and can be mounted on the front. Additional auxiliary contact blocks, mechanical interlocks, and timer modules are available as accessories.