F3DA08-5R_YOKOGAWA_PRODUCT_吉林易择科技技术发展有限公司

The Yokogawa F3DA08-5R is an analog output module designed for Yokogawa’s FA-M3 “range-free” controller series. It provides 8 independent analog voltage output channels. The module supports selectable output signal voltage ranges, high resolution via a 16-bit DAC, fast conversion/update times, and precise control. It does not support current output; only voltage out-puts are allowed for this model. The output range and type are configurable via the module’s mode registers.

+86 13600179521

DESCRIBE

Specifications

Number of channels: 8 voltage output channels

Output type: Voltage only (no current output)

Output voltage ranges:

-10 to +10 V

0 to 10 V

0 to 5 V

1 to 5 V

Resolution: 16-bit DAC

Update / conversion time:

DAC conversion: approx. 2 µs per channel

Update request to actual output: 2 µs + (2 µs × number of updated channels)

Output impedance: ≤ 0.5 Ω

Load resistance:

For ±10 V and 0–10 V: ≥ 1 kΩ

For 0–5 V and 1–5 V: ≥ 500 Ω

Capacitive load (allowable): ≤ 20 nF

Insulation: Output to internal circuits withstands 500 VDC for 1 min

Power supply: 24 V DC nominal (range 19.2–30 V DC), consumption about 60 mA

Fail-time output: Configurable per channel (output behavior on CPU failure)

Digital scaling: Output represented as digital range -30,000 to +30,000

Accuracy: ±0.1 % of full scale at 23 °C ±2 °C; typically ±0.3 % FS over full operating temperature

Operating temperature: 0–55 °C

Dimensions: approx. 28.9 mm (W) × 100 mm (H) × 106.2 mm (D)

Weight: about 180 g

Connection: 18-point terminal block, M3.5 screws

Other features:

High-speed conversion and synchronous update

Outputs enter high-impedance state on invalid settings

SERVICE HOTLINE +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： 615739355