Key Parameters:
| Category | Specification |
| ：--- | :--- |
| Series | Yokogawa µR / UT Series (Advanced Signal Conditioner) |
| Function | DC Voltage Isolator with Dual Analog and Dual Digital Outputs |
| Input Signal | DC Voltage (Range: 1-5V DC, as set by 031 code) |
| Output 1 Signal | Analog, 4 to 20 mA DC (isolated) |
| Output 2 Signal | Analog, 0 to 10V DC (isolated, as indicated by 6A) |
| Status Output | 2 Solid-State (Transistor) Outputs (for alarm or status) |
| SS Output Rating | Typically 30V DC, 50 mA max. |
| Power Supply | 100 - 240V AC, 50/60 Hz (Standard for this series) |
| Isolation | Input-to-Output1-to-Output2-to-Power: Fully isolated. |
| Accuracy | Typically ±0.1% of set span. |
| Operating Temperature | -5 to +55°C (23 to 131°F) |
| Mounting | Standard DIN rail (35mm) |
| Configuration | Configured via DIP switches and potentiometers on the front face. |
| Status Indicators | LEDs for power and status output. |

Typical Application

Input: A 1-5V DC signal from a controller, sensor, or potentiometer.

Processing: The conditioner isolates the signal and converts it into two different analog outputs.

Output 1: A 4-20 mA signal is sent to a PLC or DCS for control.

Output 2: A 0-10V signal is sent to a variable frequency drive (VFD) or local display.

Status Outputs: The two transistor outputs activate alarms for high/low limits or system faults.