Key Parameters :
Category Specification
Model Code UR1A-200N-1KD-2X1-2
*Decoder: UR=Series, 1=Single channel, A=Option, 200N=4-20mA Input, 1KD=1-in/2-out Function, 2X1=Output & Power, 2=Option*
Series UTAdvanced (Signal Conditioner)
Input
• Signal Type 4 to 20 mA DC (indicated by 200N)
• Input Impedance Approx. 25 Ω
• Allowable Input Range -10 to +20 mA (Withstandable/Overrange)
Output
• Signal Type Two independent, isolated 4 to 20 mA DC outputs (indicated by 1KD)
• Load Resistance 0 to 550 Ω (for each output, at 24V DC power supply)
• HART Communication Yes. The 2X1 code specifies that the second output supports HART digital signal pass-through.
General Performance
• Isolation 3-way isolation between Input-Output1-Output2-Power Supply.
• Accuracy ±0.1 % of span (includes linearity, hysteresis, and repeatability)
• Temperature Effect ±0.2 % of span per 10°C (0 to 55°C range)
• Response Time ≤ 400 ms (0 → 90%)
Power Supply
• Rated Voltage 24 V DC (indicated by 2 in 2X1-2; Allowable range: 19.2 to 28.8 V DC)
• Power Consumption Approx. 1.2 W
Physical
• Mounting Standard 35 mm DIN rail
• Module Dimensions 22.5 mm (W) x 100 mm (H) x 115 mm (D)
• Weight Approx. 130 g
• Wiring Removable screw terminal blocks
Environmental
• Operating Temperature -20 to +70 °C
• Storage Temperature -40 to +85 °C
• Humidity 5 to 95 % RH (non-condensing)
Safety & Isolation
• Insulation Resistance ≥ 100 MΩ (at 500 V DC)
• Dielectric Strength 1500 V AC for 1 minute (between all isolated circuits)
Standards & Compliance
• EMC Complies with CE, UKCA marking requirements. Conforms to EN 61326-1.