Key Parameters :
Category Specification
Model Code UR1b-060N
*Decoder: UR=Series, 1=Single channel, b=Option, 060=Model, N=4-20mA Input*
Series UTAdvanced (Signal Conditioner)
Input
• Signal Type 4 to 20 mA DC (Current input)
• Input Impedance Approx. 25 Ω
• Allowable Input Range -10 to +20 mA (Withstandable/Overrange)
Output
• Signal Type 4 to 20 mA DC
• Load Resistance 0 to 550 Ω (at 24V DC power supply)
• Allowable Output Range -10 to +20 mA (Withstandable/Overrange)
General Performance
• Isolation 3-way isolation between Input-Output-Power Supply
• Accuracy ±0.1 % of span (includes linearity, hysteresis, and repeatability)
• Temperature Effect ±0.2 % of span per 10°C (0 to 55°C range)
• Response Time ≤ 400 ms (0 → 90%)
• HART Communication No. This is a basic analog isolator and does not support HART signal pass-through.
Power Supply
• Rated Voltage 24 V DC (Allowable range: 19.2 to 28.8 V DC)
• Power Consumption Approx. 1.2 W
Physical
• Mounting Standard 35 mm DIN rail
• Module Dimensions 22.5 mm (W) x 100 mm (H) x 115 mm (D)
• Weight Approx. 130 g
• Wiring Removable screw terminal blocks
Environmental
• Operating Temperature -20 to +70 °C
• Storage Temperature -40 to +85 °C
• Humidity 5 to 95 % RH (non-condensing)
Safety & Isolation
• Insulation Resistance ≥ 100 MΩ (at 500 V DC)
• Dielectric Strength 1500 V AC for 1 minute (between Input-Output-Power Supply-Ground)
Standards & Compliance
• EMC Complies with CE, UKCA marking requirements. Conforms to EN 61326-1.
Key Features & Applications
Reliable Isolation: Provides 1500V AC isolation to break ground loops and protect control systems from electrical noise and transients.

High Accuracy: Maintains signal integrity with ±0.1% accuracy, ensuring precise data transmission.

Compact Design: Its slim 22.5mm width allows for high-density mounting on DIN rails, saving panel space.

Simple Operation: A dedicated analog isolator without complex configuration or software, offering a "wire and work" solution.

Typical Applications: Used across various industries (oil & gas, chemical, water treatment, manufacturing) to isolate 4-20mA signals from pressure transmitters, flow meters, level sensors, and other instruments before they reach the PLC or control room.