DM1045B60_YOKOGAWA_PRODUCT_吉林易择科技技术发展有限公司

The Yokogawa DM1045B60 is a Digital Input Module designed for use with the Yokogawa FA-M3 series of programmable logic controllers (PLCs).<br /> This module acts as an interface between field devices and the PLC's main CPU. It is responsible for reading the on/off status (discrete signals) from devices like push buttons, limit switches, proximity sensors, and relay contacts, converting these signals into a digital format (1 or 0), and transmitting this data to the CPU for logic processing.

Grace +86 13600179521

DESCRIBE

Key Technical Specifications
Parameter Specification
Type Digital Input (DI) Module
Compatible System Yokogawa FA-M3 Series PLC
Mounting Installs in an FA-M3 series I/O rack (e.g., a main base unit or extension base unit)
Number of Points 16 points (This is a standard configuration for this series)
Input Signal 24 V DC (Typical voltage for this model number)
Input Circuit Sink or Source type (configurable in groups, e.g., 8 points/common)
Rated Input Voltage 24 V DC
Operating Voltage Range 20.4 to 26.4 V DC (Typical)
ON Voltage/Current ≥ 15 V DC / ≥ 3 mA (Typical)
OFF Voltage/Current ≤ 5 V DC / ≤ 1 mA (Typical)
Response Time ≈ 10 ms (ON → OFF and OFF → ON)
Isolation Photocoupler isolation between field inputs and internal logic.
Internal Current Consumption 5 V DC: ≈ 100 mA (from backplane)
Connection Removable terminal block (e.g., 20-pin type)

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com