SF0080 S1 -GA000BE2BT112A-2JA12_YOKOGAWA_PRODUCT_吉林易择科技技术发展有限公司

The Yokogawa SF0080 S1 -GA000BE2BT112A-2JA12 is a high-performance, flange-mounted differential pressure (DP) transmitter from the EJA-E series. It is designed for level and flow measurement applications where the process fluid must be isolated from the transmitter's measuring element, typically due to high temperature, viscosity, or a tendency to crystallize or solidify.

Grace +86 13600179521

DESCRIBE

(Parameters / Specifications)
Category Parameter Specification / Note
General Model EJA110E (Flange-mounted DP Transmitter)
Type Differential Pressure Transmitter with 1-Side Remote Seal
Measuring Principle Single-crystal silicon resonant sensor
Power Supply 10.5 to 42 V DC (2-wire system)
Communication BRAIN or HART protocol (Switchable)
Performance Accuracy ±0.055% of Span
Stability ±0.1% of URL per 10 years
Response Time 90 ms (can be adjusted from 0.6 to 64 sec)
Pressure URL (Upper Range Limit) Varies by specific model. For EJA110E, common URLs are 100 kPa, 500 kPa, etc.
Maximum Working Pressure JIS 10K/20K flange rating (Approx. 2 MPa for 10K)
Remote Seal Flange Standard JIS 10K/20K Flat Face (FF)
Flange Size 3-inch (80mm)
Diaphragm Material SUS316L
Fill Fluid Silicone Oil
Capillary Length 1.5 meters
Temperature Limit -10 to +200 °C (14 to 392 °F) - Limited by fill fluid
Environmental Ambient Temperature -40 to 85 °C (-40 to 185 °F)
Humidity 0 to 100% RH
Vibration Influence ±0.1% URL max. under 0.2G @ 15-200 Hz
Enclosure Rating IP67 (NEMA 4X)

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com