Key Parameters
Parameter Specification Notes
General Data
Article Number OL1E-R1010A13 "R" indicates Retroreflective mode
Sensor Type Miniature Photoelectric Sensor, Retroreflective
Electrical Data
Operating Voltage 12 ... 30 V DC
No-Load Supply Current ≤ 15 mA Very low power consumption
Output Type 1 x PNP, NO (Normally Open) "A" in the part number often indicates PNP output
Switching Current max. 50 mA Suitable for PLCs and low-power inputs
Optical Data
Light Source Red visible light 655 nm
Sensing Range Up to 300 mm (with reflector) Adjustable via potentiometer. Range depends on reflector used.
Recommended Reflector SICK REF 101010 or similar A small, matching reflector is required.
Adjustment
Adjustment Sensitivity potentiometer For fine-tuning the sensing range
Switching Frequency
Response Time ≤ 0.5 ms Very fast response
Switching Frequency ≤ 1,000 Hz
Mechanical Data
Housing Material Plastic (PBT)
Dimensions (W x H x D) 10 x 10 x 5.5 mm The key selling point: extremely compact
Protection Rating IP67 Dust-tight and protected against temporary immersion
Connection Fixed cable, 0.5 m Short, flexible cable for tight spaces
Cable Type PVC, 3 x 0.09 mm² Very thin and flexible wires
Environmental Conditions
Operating Temperature -25 °C ... +55 °C
Storage Temperature -40 °C ... +70 °C
Approvals
Standards CE, cULus