Key Features

Resolution: 1,024 PPR for accurate position and speed measurement

Solid shaft (10 mm) design with clamping flange

Push-pull (HTL) interface for flexible signal transmission

Index pulse (Z) for reference positioning

Rugged aluminum housing with IP65 protection

Designed for industrial automation and motor feedback applications

Technical Specifications
Electrical

Resolution: 1,024 pulses per revolution (PPR)

Output Signal: Incremental, push-pull (HTL), channels A, B, Z (and their complements)

Supply Voltage: 4.5 … 32 V DC

Max. Output Frequency: ≤ 300 kHz

Reference Signal: 1 pulse per revolution

Protection: Reverse polarity and short-circuit protection

Mechanical

Shaft Type: Solid shaft, 10 mm diameter

Mounting: Clamping flange, aluminum housing

Max. Operating Speed: 6,000 rpm continuous, 8,000 rpm short-term

Starting Torque: ~1.5 N·cm at 20 °C

Shaft Load Capacity: 40 N axial / 60 N radial

Bearing Life: ~2 × 10⁹ revolutions

Weight: ~200 g (without cable)

Environmental

Protection Rating: IP65 (dust-tight and protected against water jets)

Operating Temperature: –20 °C … +85 °C

Storage Temperature: –40 °C … +100 °C

Vibration Resistance: 20 g (10 Hz … 2,000 Hz)

Shock Resistance: 100 g, 6 ms

MTTFd: ~600 years (non-safety component)