General Parameters
Model: TSXCUSBMBP

Type: USB to Modbus Protocol Converter

Compatible Systems: Modicon Premium/Quantum PLCs

Enclosure Rating: IP20 (office environment)

Dimensions (W×H×D): 60 × 25 × 85mm

Weight: 0.15kg

Color: White/Blue

Interface Specifications
✔ USB Port:

Type: USB 2.0 Type-B (device mode)

Speed: 12Mbps (full-speed)

Protocol: Virtual COM Port (VCP)

Driver Support: Windows 7/10/11 (32/64-bit)

✔ Modbus Port:

Type: RS-485 (2-wire)

Terminals: Screw-clamp (A/B/COM)

Baud Rate: 300-115,200 bps (configurable)

Isolation: 1500V DC (USB to RS-485)

Protocol Support
Modbus RTU: Master/Slave mode

Modbus ASCII: Configurable

Parity: None/Even/Odd

Data Bits: 7/8 bits

Stop Bits: 1/2 bits

Electrical Characteristics
Power Supply: USB bus-powered (5V DC/500mA max)

RS-485 Signal Levels: ±5V differential

Load Capacity: Up to 32 nodes (120Ω termination)

Environmental Specifications
Operating Temperature: 0°C to +50°C

Storage Temperature: -20°C to +70°C

Relative Humidity: 5% to 95% (non-condensing)

Certifications & Standards
EMC: EN 61000-6-2, EN 61000-6-3

Safety: UL 60950-1, CSA C22.2 No.60950-1

RoHS: Compliant

Software Compatibility
✔ Configuration Tools:

Unity Pro

Modscan (third-party)

Built-in Windows COM port

✔ LED Indicators:

PWR: Green (USB power)

TX/RX: Yellow (data activity)

ERR: Red (communication fault)

Included Accessories
USB Type-A to Type-B cable (1.8m)

Terminal plug (for RS-485)

Driver CD (legacy systems)

Typical Applications
PLC programming via USB

Modbus network monitoring

SCADA system integration

Device configuration