Range of product
Easy Lexium 26
Device short name
LXM26D
Format of the drive
Compact housing
Product or component type
Motion servo drive
Line current
3.8 A 211.6 % at 220 V, single phase
3.8 A 183.7 % at 220 V, three phase
Complementary
Network number of phases
Single phase
Three phase
[Us] rated supply voltage
220 V (- 10...15 %) for three phase
220 V (- 20...15 %) for single phase
Supply voltage limits
200…255 V three phase
170…255 V single phase
Supply frequency
50/60 Hz - 5...5 %
Network frequency
47.5...63 Hz
Continuous output current
2.6 A at 16 kHz
Output current 3s peak
7.8 A at 220 V
Continuous power
400 W at 220 V
Nominal power
0.4 kW at 220 V 16 kHz
Switching frequency
16 kHz
Overvoltage category
III
Maximum leakage current
1.3 mA
Output voltage
<= power supply voltage
Electrical isolation
Between power and control
Type of cable
Twisted shielded pairs cable (single or double) (temperature: 0…55 °C)
Electrical connection
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)
Tightening torque
PE (ground): 1.4 N.m
Discrete input number
8 programmable (CN1)
1 pulse train input (PTI) (CN1)
2 fast capture (CN1)
Discrete input voltage
24 V DC for logic
Discrete input logic
Positive or negative (CN1)
Discrete output number
5
1
Discrete output type
Logic (CN1) at 12...24 V DC
Pulse train output (PTO) (CN1)
Discrete output voltage
12...24 V DC
Discrete output logic
Positive or negative (CN1)
Analogue input number
2
Absolute accuracy error
0.1 %
Analogue input type
V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm, resolution: 12 bits
T_REF voltage analog input
Control signal type
Servo motor encoder feedback CN2
Protection type
Against reverse polarity: inputs signal
Against short-circuits: outputs signal
Overcurrent: motor
Overvoltage: motor
Undervoltage: motor
Overheating: motor
Overload: motor
Overspeed: motor
Physical interface
RS485 for Modbus Serial line slave
Status LED
1 LED (red) charge
Signalling function
Servo status and fault codes five 7-segment display units
Marking
CE
CULus
CSA
type of cooling
Natural convection
Operating position
Vertical
Product compatibility
Servo motor BCH2 (60 mm, 2 motor stacks)
Servo motor BCH2 (80 mm, 1 motor stacks)
Servo motor BCH2 (130 mm, 1 motor stacks)
Width
55 mm
Height
150 mm
Depth
146 mm
Net weight
1 kg
Environment
EMC filter
Without EMC filter
Electromagnetic compatibility
Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Standards
IEC 61800-5-1
Product certifications
CSA
cULus
CE
IP degree of protection
IP20
Vibration resistance
3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance
10 gn, type I conforming to IEC 60068-2-27
Relative humidity
5…95 % without condensation
Ambient air temperature for operation
0…55 °C
Ambient air temperature for storage
-25…65 °C
Operating altitude
<= 1000 m without derating
> 1000...2000 m 1 % per 100 m
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.498 cm
Package 1 Width
22.924 cm
Package 1 Length
23.602 cm
Package 1 Weight
1.3 kg
Unit Type of Package 2
S03
Number of Units in Package 2
5
Package 2 Height
30.0 cm
Package 2 Width
29.9 cm
Package 2 Length
39.8 cm
Package 2 Weight
7.151 kg