AJ65SBTB1-32T1_Mitsubishi_PRODUCT_吉林易择科技技术发展有限公司

The AJ65SBTB1-32T1 is a 32-point transistor output (sink type) remote I/O module designed for Mitsubishi's CC-Link network. It enables distributed control in industrial automation systems by extending I/O points over a high-speed CC-Link fieldbus.

Grace +86 13600179521

DESCRIBE

Key Features & Specifications
1. General Specifications
Model: AJ65SBTB1-32T1

I/O Type: 32-point transistor output (sink type, 0.5A per point)

Rated Load Voltage: 12-24V DC

Maximum Load Current: 0.5A per point / 4A per common (8 points per common)

Leakage Current: 0.1mA max. (OFF state)

Response Time: 1ms max. (OFF→ON), 2ms max. (ON→OFF)

2. CC-Link Network Compatibility
Communication Speed: 156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps

Maximum Stations per Network: 64

Cable Type: CC-Link dedicated cable (shielded twisted pair)

Termination Resistor: 110Ω (required at both ends of the network)

3. Environmental & Mechanical Specs
Operating Temperature: -10°C to 55°C

Storage Temperature: -25°C to 75°C

Vibration Resistance: 10-57Hz, 0.075mm amplitude / 57-150Hz, 9.8m/s² acceleration

Shock Resistance: 147m/s² (3 times in X/Y/Z directions)

Mounting: DIN rail or direct screw mounting

4. Indicators & Diagnostics
RUN LED: Indicates normal operation

L RUN LED: Indicates CC-Link communication status

ERR LED: Indicates errors (module failure, communication error)

Per-point output status LEDs

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com