Key Specifications
Parameter Specification
Model MDS-B-SVJ2-10
Series MDS-B-SVJ2 (CNC Drive System)
Rated Output 10 kW
Peak Output 15 kW (30 minutes)
Input Power 3-phase AC 200-230V (±10%), 50/60Hz
Control Method Advanced Vector Control
Feedback System Supports absolute/incr. encoders (22-bit resolution)
Communication Mitsubishi High-Speed Bus
Regenerative Braking Requires external resistor
3. Control Features
✔ High-Precision Control:

Sub-micron level positioning

Advanced vibration suppression

Adaptive gain tuning

✔ Multi-Axis Synchronization:

Perfect for complex CNC operations

Supports rigid tapping and thread cutting

✔ Smart Functions:

Built-in dynamic stiffness control

Auto-tuning for mechanical resonance suppression

Real-time load monitoring

4. Protection & Safety
Overcurrent/Overvoltage protection

Motor overload detection

Emergency stop circuit (Safe Torque Off)

Ground fault protection

Regenerative overvoltage prevention

IP20 Protection (Control cabinet installation required)

5. Physical Specifications
| Dimension (W×H×D) | 325 × 450 × 180 mm |
| Weight | Approx. 15 kg |
| Cooling Method | Forced air cooling (Fan-equipped) |
| Mounting | Vertical panel mounting |

6. Environmental Ratings
Operating Temp.: 0°C to +55°C (Derating above 40°C)

Storage Temp.: -20°C to +65°C

Humidity: 20-90% RH (Non-condensing)

Vibration: 4.9 m/s² (10-55Hz)