PR9268/017-100_EPRO_PRODUCT_吉林易择科技技术发展有限公司

Key Specifications: • Sensitivity: 10.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Temp Range: -40°C to +175°C (peak 200°C) Extreme-Environment Design: ✓ 11mm ruggedized probe ✓ M14×1.5 threaded mounting ✓ 6MPa pressure rating ✓ 25g vibration resistance ✓ Optional IP68 protection Measurement Performance: Target: AISI 4140 steel Linear range: 0.3-0.7mm Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • High-temp mineral-insulated cable • ATEX/IECEx options available Typical Applications: Gas turbine hot section monitoring Steam turbine high-pressure stages Offshore compressor protection

Grace +86 13600179521

DESCRIBE

Key Parameters
Electrical Specifications
Sensitivity: 10.0 mV/µm (factory-calibrated, -100 suffix)

Measurement Range: 0 to 1.0 mm (1000 µm)

Output Signal: -2 to -20V DC (linear to gap distance)

Frequency Response: 0 to 10 kHz

Power Supply: -24V DC ±10%

Mechanical & Environmental
Probe Diameter: 11 mm

Thread Size: M14×1.5

Operating Temperature:

Sensor Head: -40°C to +175°C (short-term +200°C)

Cable/Connector: -40°C to +105°C

Vibration Resistance: Up to 25g (50Hz)

Pressure Rating: 6 MPa (60 bar)

Protection Class: IP68 (optional)

Calibration & Target
Target Material: AISI 4140 steel (default)

Linear Range: Middle 60% of full scale (~0.3–0.7mm for 1.0mm range)

Recommended Gap Voltage: -10V DC

Compatibility & Options
Cable: High-temperature mineral-insulated (5m standard)

Works With: EPRO MMS6000 monitoring systems

Compliance: API 670, ATEX/IECEx (optional)

Typical Applications
Gas turbine blade tip clearance

Steam turbine shaft vibration (high-pressure sections)

Offshore compressor monitoring

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com