The Schneider Electric EA9XN310 is a voltage monitoring relay / under-voltage and over-voltage release from the Easy9 (EA9) range. It is designed to automatically disconnect an electrical circuit when the supply voltage falls below a set threshold (under-voltage) or rises above a set threshold (over-voltage), thereby protecting connected equipment from damage due to abnormal voltage conditions.

The Schneider Electric EZD is a compact and economical 4-Pole, 63A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in three-phase electrical distribution systems, it provides essential defense against overloads and short-circuits.

The Schneider Electric iC65H is a high-breaking capacity, 2-Pole, 6A Miniature Circuit Breaker (MCB) specifically designed for Direct Current (DC) circuits. Based on the renowned Acti 9 iC60 series platform, it is engineered to safely interrupt overload and short-circuit faults in DC systems.

The Schneider Electric WATSG is a heavy-duty, 4-pole (3P+N), 250A manual changeover switch. Designed for robust performance in critical power distribution systems, it enables safe and reliable manual transfer of electrical loads between two independent three-phase AC power sources (e.g., Utility Main and Backup Generator).

The Schneider Electric CVS is a robust and versatile 630 Amp, 3-Pole Moulded Case Circuit Breaker (MCCB) from the Compact Versatile Solution range. Designed for demanding high-current applications in industrial and large commercial power distribution systems, it provides reliable protection and control for major three-phase feeders and loads.

The Schneider Electric LC1G 620 is a high-performance, 620A rated, 3-pole AC contactor from the advanced Tesys G series. Designed for demanding industrial applications, it is used for the reliable switching and control of very large three-phase loads, such as heavy-duty motors, large heating banks, or as a main power contactor in centralized control systems.

The Schneider Electric Compact NSX is a high-performance Moulded Case Circuit Breaker (MCCB). This model features a 100A frame size (NSX100), N-type (High) breaking capacity, 3-pole configuration, and is set for a 32A rated current.

The Schneider Electric CVS is a versatile and robust 125 Amp, 4-Pole (4P) Moulded Case Circuit Breaker (MCCB) from the Compact Versatile Solution range. Designed for demanding industrial, commercial, and infrastructure applications, this breaker provides reliable protection and control for three-phase systems with a neutral conductor.

The Schneider Electric WATSNA is an Automatic Transfer Switch (ATS). The model WATSNA-160/160-4PCR specifies a 160A rated current, a 4-pole (3P+N) configuration with overlapping Neutral (PCR - "Pole Common for Neutral"), and is designed for transferring loads between two independent AC power sources automatically.

The Schneider Electric Compact NSX is a versatile Moulded Case Circuit Breaker (MCCB). This model features a 100A frame size (NSX100), F-type breaking capacity, 4-pole (3P+N) configuration, and is set for an 80A rated current.

The Schneider Electric EA9L is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and a maximum discharge current (Imax) of 40 kA per mode. Part of the user-friendly Easy9 range for residential and light commercial applications, it provides primary and secondary surge protection in a single, compact device.

The Schneider Electric Compact NSX is a versatile 3-Pole Moulded Case Circuit Breaker (MCCB) equipped with an adjustable electronic trip unit. The key feature of this model is its wide adjustable current range of 100A to 160A, accommodated within a single frame (typically the NSX160 frame).