Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1/2" to 6" (DN 15 to DN 150) End Connections Flanged - ANSI Class 125, 150, 200, 300. RF (Raised Face) standard. Body Styles Globe Body - Standard. Body Materials Cast Iron (Standard for many services), Carbon Steel (WCB), Stainless Steel (CF8/304, CF8M/316). Pressure & Temperature Pressure Rating Varies with body material and class. Common ratings are ANSI Class 125, 150, 200, and 300. Temperature Range Standard packing: -40°F to 450°F (-40°C to 232°C). Extended ranges possible with high-temperature packing. Internal Parts (Trim) Trim Types Quick-Open (Standard), Linear, Equal Percentage. Trim Design Top-Guided, Unbalanced, Single-Port Plug. Leakage Class Class II (standard metal-to-metal seat). Class IV (with optional soft seat). Trim Materials Stainless Steel (Standard), Carbon Steel, Stellite, Brass. Seat Ring Screwed-in or seal-welded design. Flow Capacity Flow Coefficient (Cv) Varies by valve size and trim. Consult specific Cv tables. Example: A 2" SR8 has a typical Cv in the range of ~15 to 50. Actuator (Typical) Type Fisher 657 (spring-and-diaphragm, direct-acting) or 667 (spring-and-diaphragm, reverse-acting). Action Air-to-Open (Fail Close) or Air-to-Close (Fail Open). Standard Signal 3-15 psig (0.2-1.0 bar) control signal.

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1" to 12" (DN 25 to DN 300) End Connections Flanged - ANSI Class 150, 300, 600, 900, 1500. RF or RTJ. Body Styles Globe (Standard), Angle (Excellent for abrasive services as flow directly exits). Body Materials Carbon Steel (WCB) - Standard. Stainless Steel (CF8M) and other alloys available. Pressure & Temperature Pressure Rating Up to ANSI Class 2500 depending on body size and type. The 1098H-EGR is rated for higher pressures. Temperature Range Standard: -50°F to 450°F (-46°C to 232°C). Extended ranges possible with special components. Internal Parts (Trim) Trim Design Cage-Guided, Balanced Plug - Standard. Flow Characteristics Equal Percentage (Standard), Linear, Quick Open. V-notch trim for severe services. Trim Materials Stainless Steel (Standard). Hardened Steels (e.g., 17-4PH, 440C), Stellite, and Tungsten Carbide for extreme abrasion. Leakage Class Class II (metal-to-metal, standard). Class IV (with optional soft seat, not for high temps). Actuator Type Spring-and-Diaphragm Pneumatic Actuator. Action Air-to-Open or Air-to-Close (field-reversible). Standard Signal 3-15 psig (0.2-1.0 bar). Level Controller Type Displacer and Torque Tube Assembly (e.g., Fisher 2500, 3500, or 3500H series). Mounting Internal (directly on the vessel) or External (in a separate chamber).

Key Parameters Category Parameter Name Description & Typical Values General Specifications Product Type WirelessHART®, Battery-Powered Process Controller & Monitor Primary Power Source User-replaceable Lithium-Ion battery pack. Backup Power Supercapacitor for memory backup and data retention during battery replacement. Solar Power Option Terminals for connecting an external 12-24 VDC solar panel. Wireless Communication Communication Protocol WirelessHART (IEC 62591) Frequency Band 2.4 GHz ISM Band Range Up to 250 meters (800 feet) line-of-sight per hop; utilizes mesh networking to extend range. Update Rate Configurable, typically from 1 second to 60 minutes. Measurement & Control Sensed Process Variables Pressure (standard). Temperature (with optional RTD). Pressure Ranges Various ranges available, e.g., 0-30 to 0-3000 psig (0-2 to 0-207 bar). Control Output Pneumatic output to a valve actuator (for control applications). Control Modes Proportional (P) and Proportional-Integral (PI) Physical & Environmental Enclosure Rating NEMA 4X / IP66 - Weatherproof, watertight, and corrosion-resistant. Ambient Temperature Range -40°F to 185°F (-40°C to 85°C) Process Temperature -40°F to 250°F (-40°C to 121°C); higher with accessory. Housing Material Fiberglass-reinforced polyester Battery Life Expected Battery Life Highly dependent on update rate and control activity. • Monitoring only: Typically 5-10 years. • Control application: Typically 2-5 years. Can be extended indefinitely with solar power.

Key Parameters & Specifications The following parameters are typical for the EZH and EZHSO series. Category Parameter Name Description & Typical Values General Specifications Actuator Type Electric, Spring-Return (EZH) or Electric, Non-Spring Return (EZHSO) Valve Style Globe Valve or Angle Valve body Valve Size 1/2" to 2" (DN 15 to DN 50) - Common for HVAC applications. End Connections Screwed (NPT) - Standard. Flanged or other connections may be available. Electrical Data Input Signal & Power 20 to 135 VAC, 50/60 Hz; 2-wire system. The voltage level modulates between a minimum (e.g., ~30V = 3 psi = closed) and maximum (135V = 15 psi = open) to command the position. Power Consumption Typically 5-6 VA (running). Valve Body Body Materials Bronze or Cast Iron - Standard. Ductile Iron and Stainless Steel may be options. Pressure Rating Varies by body material and size. e.g., Bronze: 200-400 psi WOG. Temperature Limits Standard: -20°F to 250°F (-29°C to 121°C). High-Temp: Up to 350°F (177°C) with special packing. Trim & Flow Flow Characteristic Equal Percentage - Standard, ideal for HVAC water systems with varying pressure drops. Leakage Class Class IV (with soft seat) - Standard, providing tight shut-off. Performance Stroke Time Typically 30 to 60 seconds for full travel (depending on valve size). Fail-Safe Action (EZH only) Fail-Closed or Fail-Open - Field-reversible. Enclosure Rating NEMA 1 (Standard), NEMA 4X (Weatherproof) - Optional.

Key Parameters Category Parameter Name Description & Typical Values General Specifications Actuator Type Pneumatic, Spring-and-Diaphragm (61S) / Double-Acting (61D) Motion 90° Rotary (quarter-turn) Housing Material Aluminum with corrosion-resistant coating. Spring Material Epoxy-coated carbon steel (standard). Air & Pressure Data Standard Supply Pressure 3-15 psig (0.2-1.0 bar) control signal. Maximum Supply Pressure Typically 50-70 psig (3.4-4.8 bar) for spring-return models. Higher for double-acting. Torque Output Output Torque Varies by actuator size and air pressure. Sizes range from 61 (smallest) to 67 (largest). • Example (61S): ~40 to 500 in-lbs (∼4.5 to 56 Nm) depending on size and spring range. • Example (61D): Provides higher torque than equivalent spring-return models. Spring-Return Models (61S) Spring Ranges Multiple spring ranges are available to match the required torque and fail-safe action. Fail-Safe Action Fail-Closed or Fail-Open - Determined by the linkage setup. Performance Air Consumption Relatively low, typically a few standard cubic feet per stroke. Temperature Limits Standard: -20°F to 150°F (-29°C to 66°C). High-temperature kits are available for up to 250°F (121°C). Options & Accessories Positioners Can be mounted with a Fisher 3582 or similar rotary valve positioner for precise control. Limit Switches Feedback devices (e.g., Fisher 415) can be added to indicate valve position. Solenoid Valves Used for on/off control or as part of a safety instrumented system (SIS). Air Sets Filter regulators (e.g., Fisher 67/68) can be mounted directly to the actuator.

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1/2" to 6" (DN 15 to DN 150) End Connections Flanged - ANSI Class 150, 300, 600. RF (Raised Face) or RTJ (Ring Type Joint) facings. Body Styles Globe Body - Standard. Angle Body - Also available for erosive/cavitating services or where a 90° turn is needed. Body Materials Carbon Steel (WCB) - Standard. Stainless Steel (CF8M/316) and other alloys are available. Pressure & Temperature Pressure Class ANSI Class 150, 300, 600 Temperature Range Standard packing: -40°F to 450°F (-40°C to 232°C). Extended ranges possible with high-temperature packing and designs. Internal Parts (Trim) Trim Types Quick-Open (Standard), Linear, Equal Percentage. Trim Designs Post-Guided (Standard) - For general service. Cage-Guided - For superior stability, reduced noise, and balanced trim option. Trim Characteristics Unbalanced Trim (Standard) - Requires higher actuator force. Balanced Trim (Optional) - For high pressure drop applications, reduces actuator force. Leakage Class Class II (standard metal seat). Class IV or Class VI (with optional soft seat). Trim Materials Stainless Steel (Standard), 316 Stainless Steel, Stellite, Hastelloy, and other alloys. Flow Capacity Flow Coefficient (Cv) Varies by valve size and trim. Consult specific Cv tables for accurate values. Example: A 2" N300 has a typical Cv range from ~10 to 70 depending on trim. Actuator (Typical) Type Fisher 657 (spring-and-diaphragm, direct-acting) or 667 (spring-and-diaphragm, reverse-acting). Action Air-to-Open (Fail Close) or Air-to-Close (Fail Open). Standard Signal 3-15 psig (0.2-1.0 bar) control signal.

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1/2" to 6" (DN 15 to DN 150) End Connections Flanged (ANSI 150, 300, 600 lbs) - Standard. Other connections may be available. Body Materials Carbon Steel (WCB) - Standard. Other materials like Stainless Steel may be optional. Pressure Ratings Maximum Inlet Pressure Up to 1440 psig (~100 bar) - Dependent on valve size and pressure class. Outlet Pressure Range (Y610A/Y611A) Adjustable via spring. Multiple spring ranges available, e.g.: 5-50 psig, 20-200 psig, 100-400 psig (0.3-3.4 bar, 1.4-13.8 bar, 6.9-27.6 bar). Back-Pressure Setting Range (Y612A) Adjustable via spring, with a wide selection of ranges similar to the reducing valves. Internal Parts (Trim) Trim Design Balanced, Single-Port Plug - Standard, for stable control. Trim Materials Stainless Steel - Standard. Other materials like Carbon Steel, Stellite available. Diaphragm Material Reinforced Elastomer (e.g., NBR) - Standard. Performance Flow Characteristic Linear - Standard, providing proportional control. Leakage Class Class II (metal-to-metal seat, standard). Class IV (with optional soft seat). Temperature Limits Standard: -20°F to 150°F (-29°C to 66°C) with elastomer diaphragm. Higher temperatures possible with specific components.

Key Parameters & Specifications Category Parameter Name Description & Typical Values Electrical Input Input Signal Standard: 4-20 mA DC (2-wire). Other Options: 10-50 mA, 1-5 VDC, 0-100 mV, etc. Input Impedance ~850 ohms at 20 mA (for 4-20 mA, 2-wire). Varies for other signals. Power Supply For 2-wire 4-20 mA, the loop power supply is typically 12-45 VDC, depending on load. Pneumatic Output Output Pressure Ranges Multiple standard ranges, e.g.: • 3-15 psig (0.2-1.0 bar) • 3-27 psig (0.2-1.9 bar) • 6-30 psig (0.4-2.1 bar) Air Supply Pressure Must be at least 3-5 psi (0.2-0.35 bar) above the maximum required output pressure. Typical max supply: 20 to 150 psig (1.4 to 10.3 bar). Performance Accuracy Typically ±0.5% of span (including linearity, hysteresis, and dead band). Sensitivity Typically 0.05% of span. Air Consumption (Static) Very low (e.g., < 0.2 SCFH) when output is stable. Air Flow Capacity (Dynamic) Very high. Up to ~30 SCFM (approx. 50 m³/h) to quickly fill and exhaust actuator volumes. Environmental & Physical Enclosure Rating NEMA 4X (IP66) - Weatherproof, watertight, and corrosion-resistant. Ambient Temperature Range Standard: -40°F to 180°F (-40°C to 82°C). Extended: -50°F to 225°F (-46°C to 107°C) with specific options. Material Aluminum enclosure with corrosion-resistant epoxy coating. Stainless steel hardware. Mounting Directly to actuator (with bracket) or via 1/2" NPT conduit connection. Approvals Intrinsic Safety & FM/ATEX Available with appropriate intrinsic safety barriers or as an entity-approved device (FM, CSA, ATEX).

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1/2" to 6" (DN 15 to DN 150) - Extensive size range. End Connections Flanged (ANSI 125, 150, 200, 300, 600 lbs), Screwed (NPT), Socket Weld. Body Materials Cast Iron (Std.), Ductile Iron, Carbon Steel, Stainless Steel, and other alloys. Pressure Ratings Maximum Inlet Pressure Up to 4000 psig (276 bar) for high-pressure bodies. Varies by body type and material. Outlet Pressure Range (R622/R642) Adjustable via spring. Dozens of spring ranges available, from very low (e.g., 5-50 psig / 0.3-3.4 bar) to very high (e.g., 500-1500 psig / 34-103 bar). Back-Pressure Setting Range (R652) Adjustable via spring, with a wide selection of ranges similar to the reducing valves. Internal Parts (Trim) Trim Styles Single-port (Std.) or Cage-style (for guided stability, easy maintenance). Trim Characteristics Quick Opening (Std.) or Linear & Equal Percentage (available for cage-style trim). Trim Materials Stainless Steel (Std.), Carbon Steel, Stellite, Hastelloy, etc. Soft Seat (PTFE) option for tight shut-off (Class IV/V). Diaphragm Material Reinforced Elastomer (NBR std.), PTFE, or Metal. Performance Flow Characteristic Quick-opening (standard single-port), Linear or Equal Percentage (cage trim). Leakage Class Class II (metal-to-metal seat, standard). Class IV or V (with optional soft seat). Temperature Limits Standard: -20°F to 150°F (-29°C to 66°C) with elastomer diaphragm. Up to 1000°F+ (538°C+) with special components (asbestos-free packing, metal diaphragm, etc.).

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 3/4", 1", 1-1/4", 1-1/2", 2" NPT End Connections Screwed (NPT) - Standard Body Materials Aluminum (Standard for non-corrosive services). Other materials like cast steel or stainless steel may be available. Pressure Ratings Maximum Inlet Pressure (H722) Up to 5 psig (∼35 kPa). For higher inlet pressures, a primary reducing regulator is required upstream. Outlet Pressure Range (H722) Adjustable via spring. Various spring ranges are available, typically from 3" H₂O to 60" H₂O (0.75 to 15 kPa). Pressure Setting Range (H733) Adjustable via spring. Various spring ranges are available, typically from 3" H₂O to 60" H₂O (0.75 to 15 kPa). Internal Parts Diaphragm Material Neoprene-coated fabric (standard). Other materials like Buna-N or Viton may be available for specific services. Performance & Environmental Temperature Limits Standard: -20°F to 150°F (-29°C to 66°C). Temperature can affect spring rate and diaphragm life. Leakage Typically Class II (standard metal seat) or Class IV (with optional soft seat).

Key Parameters Category Parameter Name Description & Typical Values Valve Specifications Valve Size 1/2" to 3" (DN 15 to DN 80) End Connections Flanged (ANSI 125/250/300 lbs), Screwed (NPT), or others Body Materials Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel Pressure Ratings Maximum Inlet Pressure Up to 4000 psig (275 bar), depending on size and body material Outlet Pressure Range Adjustable via spring. Various spring ranges are available, e.g., 3 to 125 psig (0.2 to 8.6 bar), 50 to 300 psig (3.4 to 20.7 bar), etc. Pressure Class ANSI Class 125, 150, 300, etc. Internal Parts (Trim) Trim Materials Stainless Steel, Carbon Steel, and other alloys depending on the service. Diaphragm Material Reinforced Elastomer (e.g., NBR) or PTFE for corrosive services. Performance & Environmental Flow Characteristic Quick-opening (standard). Other characteristics may be available. Leakage Class Class II (standard) or Class IV (with soft seat). Temperature Limits Standard: -20°F to +150°F (-29°C to +66°C) with elastomer diaphragm. Higher temperatures possible with specific materials (e.g., PTFE). Configurations Control Action Pressure Reducing: Direct-acting (fails to close). Back-Pressure Relief: Direct-acting (fails to open).

Technical Specifications Input: Hydrostatic head pressure from liquid level. Output: Standard pneumatic signal: 3-15 psig (0.2-1.0 bar). Air Supply: Typically 20 psig (1.4 bar) clean, dry, instrument air. Accuracy: Typically ±0.5% of span. Span Ranges: Adjustable over a wide range. Common minimum span is around 25 inH₂O (62 mbar), and maximum span can be several hundred inches of water column. Materials of Construction: Case: Aluminum or epoxy-coated cast iron. Wetted Parts: Stainless steel (standard), Monel, Hastelloy C, and others. Process Connections: Various options including 2" NPT, 3" NPT, and ANSI flanges. Typical Applications The Fisher Type 630 is widely used in industries that rely on pneumatic control or have harsh environments: Oil & Gas: Level measurement in separators, scrubbers, and storage tanks. Chemical & Petrochemical: Interface level control in reactors and distillation columns. Power Generation: Drum level measurement and other boiler applications. Water & Wastewater: Level monitoring in treatment tanks and sumps. Pulp & Paper: Chemical level control in various stages of the process.