The Schneider Electric 29450 is a standard auxiliary contact module designed for use with ComPact NSX, ComPact NS, PowerPact Multistandard, and EasyPact CVS circuit breakers . This single module provides multiple remote status indications depending on its installation position within the breaker, including ON/OFF status (OF), trip indication (SD), fault-trip indication (SDE), and earth fault trip indication (SDV)

The Schneider Electric WATSN63/4H (part number NH00634) is a 4-pole Automatic Transfer Switch (ATS) designed for low-voltage installations up to 415V AC. It is part of the WATSN range, which integrates a control unit and a switching mechanism based on two interlocked circuit breakers, ensuring mechanical and electrical interlocking to prevent parallel connection of sources

The Schneider Electric ComPacT NSX250N is a 4-pole circuit breaker part of the new generation ComPacT NSX range . It is designed for distribution applications and features an electronic MicroLogic 4.2 Vigi trip unit

The Schneider Electric WATSNA32/4 is a 4-pole Automatic Transfer Switch (ATS) designed for low-voltage installations (up to 440V). It consists of a control unit and a switching mechanism based on two interlocked compact breakers, ensuring that the normal and standby sources cannot be connected simultaneously

The Schneider Electric INS63 4P 63A is a 4-pole, non-automatic switch-disconnector from the Compact INS63 range . It is designed for safe isolation and switching of low-voltage electrical circuits.

The INS40 3P 40A (manufacturer part number 28900) is a non-automatic switch-disconnector from the Schneider Electric Compact INS series . It is designed to provide safe isolation and switching of electrical circuits in industrial and commercial applications, ensuring safety during maintenance and operational switching

The INS80 3P 80A is a non-automatic switch-disconnector from the Schneider Electric ComPacT INS series (manufacturer part number 28904) . It is designed to provide safe isolation and switching of electrical circuits in industrial and commercial applications, ensuring safety during maintenance and operational switching

The INS100 3P 100A is a non-automatic switch-disconnector from the Schneider Electric Compact INS series . It is designed to provide safe isolation and switching of electrical circuits in industrial and commercial applications, ensuring safety during maintenance and operational switching

The INS40 4P 40A is a non-automatic switch-disconnector from the Schneider Electric Compact INS series . It is designed to provide safe isolation and switching of electrical circuits in industrial and commercial applications, ensuring safety during maintenance and operational switching

The WOTPC324S3 is a manually operated changeover switch from the Schneider Electric WOTPC range . It is designed to safely transfer the load between two power sources, typically a primary (normal) source and a backup (emergency) source such as a generator .

The WOTPC634S3 is a manually operated changeover switch from the Schneider Electric WOTPC range . It is designed to safely transfer the load between two power sources, typically a primary (normal) source and a backup (emergency) source such as a generator .

The WOTPC1004S3 is a manually operated changeover switch from the Schneider Electric WOTPC range . It is designed to safely transfer the load between two power sources, typically a primary (normal) source and a backup (emergency) source such as a generator