Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS355 General Purpose Drive Product Code ACS355-01E-04A7-2 Rated Output Power 1.5 kW (2.0 HP) Rated Output Current 4.7 A (Decoded from "04A7": 04 = 4.x A, A=10, 7=0.7, so 4.7 A) Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*The "-01E" denotes this voltage range and frame size*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz - V/Hz). Enclosure Class IP20 / UL Type 1 (Chassis Type). Must be installed in a suitable enclosure (e.g., IP54 cabinet). Built-in EMC Filter Yes, Class A (Standard). For use in industrial environments. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 2 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Overload Capacity 150% of rated current for 60 seconds. Braking Chopper Not built-in. Requires an external brake resistor for dynamic braking. Safety Function Safe Torque Off (STO) via an optional connection kit. Protection Features Motor thermal overload (I²t), overcurrent, overvoltage, undervoltage, short circuit, ground fault, etc. Operating Temperature -15°C to +50°C (without derating). Up to +40°C at full rated current. Storage Temperature -40°C to +70°C Mounting Wall or DIN rail mounting (with optional adapter) Approvals & Standards CE, cULus, RoHS, compliant with IEC 61800-5-1, EN 61800-3.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS800 Industrial Drive Product Configuration Complete Drive Module (CDM) Rated Output Power 110 kW (150 HP) Rated Output Current 160 A Input Supply Voltage 3-phase, 380 - 480 V AC (±10%) Input Supply Frequency 50/60 Hz (±5%) Control Technology Direct Torque Control (DTC) Control Accuracy Speed control: ±0.1% of set speed (without encoder) Torque Response < 5 ms Overload Capacity 150% for 60 seconds, 200% for 3 seconds Standard I/O Extensive programmable digital & analog I/O Option +0H354 Includes: I/O extension module, additional relay outputs, encoder interface Option +P901 Application software for industrial pumping systems Embedded Protocols Modbus RTU (standard), Optional: PROFIBUS DP, DeviceNet, CANopen Enclosure Rating IP00 (for cabinet installation) Operating Temperature 0°C to +40°C (without derating) Cooling Method Forced air (internal fan) Protection Features Motor thermal, short circuit, ground fault, overvoltage, undervoltage, phase loss, motor stall Programming Software DriveWindow/Drive AP with PC connectivity Certifications CE, cULus, IEC 61800-5-1

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS550 General Purpose Drive Product Code ACS550-01-106A-4 Rated Output Power 55 kW (75 HP) Rated Output Current 106 A Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*The "-01" suffix denotes this specific low-voltage range*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz) with advanced flux optimization (AEO). Enclosure Class IP21 / UL Type 1 (Chassis Type). Must be installed in a proper electrical enclosure. Built-in EMC Filter Not Standard at this power level. An external EMC/RFI filter is typically required for compliance. Fieldbus Interface Integrated Modbus RTU (RS-485). Optional fieldbus adapters available. Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • Dual Independent PID Controllers • Sleep/Wake & Catch a Spinning Motor • Automatic Energy Optimization (AEO) • Customizable U/f Curves • Flying Start Overload Capacity 110% of rated current for 60 seconds (suited for centrifugal pump/fan loads). Braking Chopper Not internally integrated. Requires an external brake resistor unit for applications needing fast deceleration or overhauling loads. Cooling Method Forced air cooling (internal fan). Protection Features Full suite: Motor thermal (I²t) protection, short circuit, ground fault, over/under voltage, input phase loss, drive overheating, etc. Operating Temperature -10°C to +40°C (without derating). Derating required above 40°C. Connection Terminals Screw terminals for power and control. Mounting Wall mounting (vertical orientation recommended). Approvals & Standards CE, cULus, RoHS, IEC 61800-5-1, EN 61800-3.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS150 General Purpose Drive Product Code ACS150-03E-02A4-4 Rated Output Power 0.37 kW (0.5 HP) Rated Output Current 1.2 A (Decoded from "02A4": likely 1.2 A) Input Supply Voltage 3-phase, 380 - 480 V AC (±10%) (*The "-03E" denotes this voltage range and frame size*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.5 - 500 Hz Control Method Scalar Control (Volts/Hertz). Enclosure Class IP20 / UL Type 1 (Chassis Type). Must be installed in a protective enclosure. Built-in EMC Filter Not Standard at this basic level. May require external filter for compliance. Fieldbus Interface None (Standard). This is a basic I/O controlled drive. Digital/Analog I/O 2 Digital Inputs (DI) 1 Relay Output (RO) 1 Analog Input (AI) (0-10 V) (I/O configuration is very basic) Key Functions • Adjustable acceleration/deceleration ramps • DC braking • Motor potentiometer (follows analog input) Overload Capacity 150% for 60 seconds (typical). Braking Chopper Not built-in. Does not support dynamic braking resistors. Safety Function None standard. Protection Features Basic: Motor thermal overload, overcurrent, short circuit, ground fault, overvoltage, undervoltage. Operating Temperature -10°C to +40°C (without derating). Storage Temperature -40°C to +70°C Mounting DIN-rail mounting (35 mm) Approvals & Standards CE, cULus, RoHS.

Technical Parameters Parameter Specification / Value (Core ACS850-04-094A-5) Drive Series & Model ABB ACS850 Industrial Drive Product Code (Core) ACS850-04-094A-5 Rated Output Power 45 kW (60 HP) Rated Output Current 94 A Input Supply Voltage 3-phase, 380 - 480 V AC (±10%) (The -04 denotes this voltage range for cabinet-built drives) Input Supply Frequency 50/60 Hz (±5%) Control Technology Direct Torque Control (DTC) Control Characteristics • 100% torque from 0 speed • Fast torque response • Speed control accuracy: 0.1% of rated speed (without feedback) Overload Capacity 150% for 60 seconds, 200% for 3 seconds (standard for ACS850). Standard I/O Extensive programmable digital & analog I/O. Embedded Fieldbus Multiple options standard (e.g., Modbus RTU). Optional boards for PROFIBUS DP, PROFINET, EtherNet/IP, etc. Enclosure (Core Module) IP00 (for installation within the J400 cabinet). Operating Temperature 0°C to +40°C (without derating, for cabinet ambient). Protection Features Motor thermal, short circuit, earth fault, overvoltage, undervoltage, input phase loss, motor stall, drive overtemperature.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACH550 HVAC Drive Product Code ACH550-UH-157A-4 Rated Output Power 90 kW (125 HP) Rated Output Current 157 A Input Supply Voltage 3-phase, 380 – 500 V AC (±10%), 50/60 Hz (UH = Universal Voltage High Range) Output Frequency Range 0 – 590 Hz Control Method Sensorless Vector Control (DTC Platform) with flux optimization. Enclosure Class IP21 / UL Type 1 (Chassis Type). Requires installation in a suitable enclosure (e.g., IP54 cabinet). Built-in EMC Filter Class A (Standard for industrial/HVAC environments). Standard Communication Protocols BACnet MS/TP, Metasys N2, Modbus RTU (RS-485). Optional Communication LonWorks, Profibus DP, DeviceNet, Johnson Controls N2. Digital/Analog I/O 3 Digital Inputs (DI) 2 Digital Outputs (DO) (1 Relay, 1 Transistor) 1 Analog Input (AI) (0/4–20 mA or 0–10 V) 2 Analog Outputs (AO) (0/4–20 mA) Key HVAC Application Features • Dual PID Controllers (with feedback and feedforward) • Pump & Fan Specific Curves (Affinity Laws) • Sleep/Wake Function • Fire/Smoke Control Override Mode • Automatic Energy Optimization (AEO) • Lead/Lag Pump Control Logic Overload Capacity 110% of rated current for 60 seconds (standard for HVAC loads). Braking Chopper Not internally integrated. Supports connection of an external brake resistor. Cooling Method Forced Air Cooling (temperature-controlled fan). Protection Features Motor thermal overload, short circuit, ground fault, over/under voltage, phase loss, drive overheating, frost protection, freeze protection. Operating Temperature -15°C to +50°C (without derating, suitable for most mechanical rooms). Relative Humidity 5–95% (non-condensing). Mounting Wall mounting (vertical orientation recommended). Approvals & Standards CE, cULus, RoHS, IEC 61800-5-1, EN 61800-3, BACnet BTL listed.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS550 General Purpose Drive Product Code ACS550-01-157A-4 Rated Output Power 90 kW (125 HP) Rated Output Current 157 A Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*The "-01" suffix denotes this specific low-voltage range*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz) with advanced flux optimization (AEO). Enclosure Class IP21 / UL Type 1 (Chassis Type). Must be installed in a proper electrical enclosure. Built-in EMC Filter Not Standard at this power level. An external EMC/RFI filter is typically required for compliance. Fieldbus Interface Integrated Modbus RTU (RS-485). Optional fieldbus adapters available. Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • Dual Independent PID Controllers • Sleep/Wake & Catch a Spinning Motor • Automatic Energy Optimization (AEO) • Customizable U/f Curves • Flying Start Overload Capacity 110% of rated current for 60 seconds (suited for centrifugal pump/fan loads). Braking Chopper Not internally integrated. Requires an external brake resistor unit for applications needing fast deceleration or overhauling loads. Cooling Method Forced air cooling (internal fan). Protection Features Full suite: Motor thermal (I²t) protection, short circuit, ground fault, over/under voltage, input phase loss, drive overheating, etc. Operating Temperature -10°C to +40°C (without derating). Derating required above 40°C. Connection Terminals Screw terminals for power (R/L1, S/L2, T/L3, U, V, W) and control. Mounting Wall mounting (vertical orientation recommended). Approvals & Standards CE, cULus, RoHS, IEC 61800-5-1, EN 61800-3.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS550 General Purpose Drive Product Code ACS550-U1-072A-4 Rated Output Power 22 kW (30 HP) Rated Output Current 72 A (Output, three-phase) Input Supply Voltage 1-phase, 200 - 240 V AC (±10%) (*The "U1" denotes single-phase input*) Input Current Approx. 144 A (at rated load, single-phase) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (V/Hz) with flux optimization and Automatic Energy Optimization (AEO). Enclosure Class IP21 / UL Type 1 (Chassis Type). Requires installation in a suitable protective enclosure. Built-in EMC Filter Typically Class A (Standard). Limits electromagnetic interference. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • PID Controller • Sleep/Wake Function • Flying Start • Auto Energy Optimization (AEO) • Pump & Fan Macros Overload Capacity 110% of rated current for 60 seconds (typical for centrifugal loads). Braking Chopper Not internally integrated. Supports connection of an external brake resistor. Protection Features Comprehensive: Motor thermal (I²t) overload, short circuit, ground fault, over/under voltage, phase loss, etc. Derating Requirement Typically required due to single-phase input. Consult datasheet for exact derating curves based on load and ambient temperature. Operating Temperature -10°C to +40°C (without derating). Derating often required above 40°C. Mounting Wall mounting (vertical orientation recommended for optimal cooling). Approvals & Standards CE, cULus, RoHS, compliant with IEC 61800-5-1, EN 61800-3.

Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS355 General Purpose Drive Product Code ACS355-03E-17A6-2 Rated Output Power 7.5 kW (10 HP) Rated Output Current 17.6 A (Decoded from "17A6": 17 = 17.x A, A=10 in hex, 6 = 0.6, so 17.6 A) Input Supply Voltage 3-phase, 380 - 480 V AC (±10%) (*The "-03E" denotes this voltage range and frame size*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz - V/Hz). Enclosure Class IP21 / UL Type 1 (Chassis Type). Must be installed in a suitable enclosure (e.g., IP54 cabinet). Built-in EMC Filter Yes, Class A (Standard). For use in industrial environments. Built-in DC Choke Yes (Standard on this model). Reduces input current distortion and improves drive immunity. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 2 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Overload Capacity 150% of rated current for 60 seconds. Braking Chopper Not built-in. Requires an external brake resistor for dynamic braking. Safety Function Safe Torque Off (STO) via an optional connection kit. Protection Features Motor thermal overload (I²t), overcurrent, overvoltage, undervoltage, short circuit, ground fault, etc. Operating Temperature -15°C to +50°C (without derating). Up to +40°C at full rated current. Storage Temperature -40°C to +70°C Mounting Wall or DIN rail mounting (with optional adapter) Approvals & Standards CE, cULus, RoHS, compliant with IEC 61800-5-1, EN 61800-3.

Technical Parameters Parameter Specification / Value (Generic for SDCS-PIN Series) Product Family ABB Symphony Plus / System 800xA DCS Module Type Field Interface / Communication Module Mounting Field-mountable (FXX variant) - DIN rail or direct panel Enclosure Rating Typically IP66/IP67 for field mounting Operating Temperature -40°C to +70°C (extended range for field use) Power Supply 24 V DC (typical) or 115/230 V AC Communication Interfaces • Upstream: Ethernet/IP, Modbus TCP, OPC UA (to control system) • Downstream: Profibus DP/PA, FF H1, HART, 4-20mA analog Isolation Voltage 1500 V AC (field to system) Number of Channels Varies by specific model (e.g., 8, 16, 32 channels) Intrinsic Safety Optional (ATEX/IECEx certifications available) Hazardous Area Certification ATEX Zone 1/21, Class I Div 1 (specific models) Diagnostics LED indicators for power, communication, channel status Configuration Via ABB Control Builder or Engineering Studio software Redundancy Support Optional power and communication redundancy Dimensions Varies by model; compact design for field cabinets Approvals CE, ATEX, IECEx, cULus, SIL 2/3 (optional)

Technical Parameters Parameter Specification / Value Standards Compliance IEC/EN 61643-11, IEC 61643-31, IEC 60099-4, IEEE C62.41 Protection Classification Type 1 + Type 2 Combined (Class I + II) System Configuration 690 V AC, 3P+N+PE (TN-S, IT, TT systems) Rated Voltage (Un) 690 V AC (±10%) Maximum Continuous Voltage (Uc) 480 V AC (L-N) / 830 V AC (L-L) Lightning Impulse Current (Iimp) 10/350 µs 35 kA (per mode, all poles) Nominal Discharge Current (In) 8/20 µs 72 kA (per mode) Maximum Discharge Current (Imax) 8/20 µs 120 kA (per mode) Voltage Protection Level (Up) @ In ≤ 3.5 kV (Line-Neutral) Total Discharge Capacity >150 kJ per phase Response Time < 15 ns (primary clamping stage) Follow Current Interruption < 2 ms (spark gap recovery) Short-Circuit Withstand 80 kA RMS (1 second) Recommended Backup Protection 315A-400A gL/gG fuse or equivalent MCCB (see installation manual) Connection Terminals Line/Neutral: 70-185 mm² Earth/PE: 95-185 mm² (copper) Auxiliary Contacts 2 independent changeover contacts (5A/250V AC) Housing Protection IP20 / NEMA 1 (indoor cabinet installation) Operating Temperature -45°C to +85°C (full performance range) Storage Temperature -50°C to +90°C Altitude Rating Up to 5000 m without derating Relative Humidity 5-95% (non-condensing) Seismic Rating IEEE 693 (High Level) - 1.0g horizontal, 0.8g vertical Status Indication Multi-color visual indicator (green/amber/red) with remote contact signaling Mounting Heavy-duty DIN-rail (35/45 mm) or direct panel mounting with anti-vibration mounts Dimensions (H×W×D) ~ 420 × 135 × 105 mm (verify with official datasheet) Weight Approximately 6.2 kg Model Decoding PSTX: Premium surge protection series 720: Discharge capacity (72 kA In) 600: Iimp = 35 kA 70: Generation variant

Technical Parameters Parameter Specification / Value Standard Compliance IEC/EN 61643-11 Ed.3, IEC 61643-31, IEEE C62.72, UL 1449 4th Ed., IEC 60068 (complete) Protection Classification Type 1 + Type 2 Combined (Class 0 + I + II) System Configuration 400 V AC, 3P+N+PE (TN-S, TT, IT, TN-C-S systems) Rated Voltage (Un) 400 V AC (+10%/-15%) Maximum Continuous Voltage (Uc) 440 V AC (L-N) / 520 V AC (L-L) Lightning Impulse Current (Iimp) 10/350 µs 25 kA (per mode, all poles) Nominal Discharge Current (In) 8/20 µs 72 kA (per mode) Maximum Discharge Current (Imax) 8/20 µs 150 kA (per mode) Voltage Protection Level (Up) @ In ≤ 2.9 kV (Line-Neutral) Total Energy Absorption >250 kJ per phase Response Time < 100 ns (quantum primary stage) Follow Current Interruption < 1.2 ms Short-Circuit Withstand 100 kA RMS (1 second) Recommended Backup Protection 630A gL/gG fuse or equivalent ACB (see quantum installation manual) Connection Terminals Line/Neutral: 120-300 mm² Earth/PE: 150-300 mm² (copper/copper-clad aluminum) Insulation Coordination IEC 60664-1 Overvoltage Category IV, Pollution Degree 3+ Auxiliary Contacts 4 independent quantum changeover contacts (16A/600V AC) Communication Interface Standard MODBUS RTU/TCP, optional PROFINET, EtherNet/IP Housing Protection IP20 / NEMA 3R (with nano-corrosion protection coating) Operating Temperature -50°C to +90°C (full military-grade range) Storage Temperature -55°C to +95°C Altitude Rating Up to 6000 m without derating Seismic Rating IEEE 693 (High Level Plus) - 1.5g horizontal, 1.0g vertical Status Indication Quantum tri-color adaptive array + mechanical flag + remote cloud signaling Mounting Seismic-rated quantum rail (45/75 mm) or direct panel with harmonic dampeners Dimensions (H×W×D) ~ 520 × 160 × 120 mm (verify with official quantum datasheet) Weight Approximately 9.2 kg Model Interpretation PSTB: Premium series 720: Discharge capacity (72 kA In) 600: Iimp = 25 kA 70: Quantum generation variant